Table of Contents
Advertisement
Cabinet
Cleaning the exterior of the drive
￭
WARNING!
Obey the safety instructions of the drive. If you ignore them, injury or death,
or damage to the equipment can occur. If you are not a qualified electrical
professional, do not do installation or maintenance work.
1. Stop the drive and do the steps in section
you start the work.
2. Clean the exterior of the drive. Use:
• vacuum cleaner with an antistatic hose and nozzle
• soft brush
• dry or damp (not wet) cleaning cloth. Moisten with clean water, or mild detergent
(pH 5-9 for metal, pH 5-7 for plastic).
WARNING!
Prevent water from entering the drive. Never use excessive amount of water,
a hose, steam, etc.
Electrical safety precautions (page 24)
Maintenance 39
before
Advertisement
Table of Contents
