Related Manuals for Bizerba GLP Series
Summary of Contents for Bizerba GLP Series
- Page 1 GLP printer driver Operating instructions from program version 4.00 6.562.98.5.01.01 en...
- Page 2 All rights reserved Tous droits réservés Reservados todos los derechos Tutti i diritti riservati © 12 / 2010 Bizerba GmbH & Co. KG, 72336 Balingen Postfach 10 01 64 72301 Balingen/Germany, Tel. (+49 7433) 12-0, Fax (+49 7433) 12-2696 E-mail: marketing@bizerba.com...
-
Page 3: Table Of Contents
GLP printer driver List of contents List of contents Instructions ....................... 4 Safe-keeping ....................4 Target group ....................4 Symbols used ....................4 Device ........................5 GLP-58 ......................5 GLP-80/160 ....................6 Software ........................7 Intented use ....................7 Rights ......................7 Guaranty ...................... -
Page 4: Instructions
In the operating instructions you will find information how to use the full functionality of the device and how to avoid possible dangers. We offer product related training classes. Please, refer to your Bizerba specialist. We continue with the development of our products which are also subject to different country regulations. -
Page 5: Device
− In industry mode (9600…1152000 baud, 8o1, no handshake), commands are understood in Bizerba’s own format. Texts and graphics can be transferred. In order to change to another operating mode, the device has to be switched off. At the beginning of the communication, the GLP printer driver tries to establish in which operating mode the printer is. -
Page 6: Glp-80/160
Device GLP printer driver GLP-80/160 The GLP 80/160 printer can be operated also without display/operating unit. This unit allows to comfortably configure the GLP printer. But even without this unit, it is possible, to configure the GLP printer via its operating panel. Description of keys on operating panel: −... -
Page 7: Software
Windows programs to be printed by GLP units. Rights All rights for the documentation and software program are reserved by Bizerba. The information in this document may be modified without special notice. Bizerba does not enter into any commitment with this document. -
Page 8: Virus Protection
Software GLP printer driver Virus protection Prior to delivery, this software is manufactured and tested against viruses based on the state-of-the-art technology. Nevertheless, it cannot be excluded, that computer viruses or other damaging software may be transferred due to other programs and/or third parties. For your own safety, we recommend that you check your PC against viruses using an up- to-date virus protection program on a regular basis and after installation of new software. -
Page 9: Installation
Bizerba’s customer service. Before installing Ensure that the computer conforms to the requirements of the Bizerba Flow Control. Before installing, end all Windows programs such as Word, Outlook etc. End all programs. Otherwise, installation errors may occur since files cannot be accessed. -
Page 10: Step 2: Usb Driver
Turn the GLP printer on and wait until the printer is initialized. Connect the GLP printer via USB cable to the PC. Windows identifies that a new device has been connected and installs the matching driver “Bizerba Gx USB”. -10- 6.562.98.5.01.01... -
Page 11: Manual Adjustment
Windows and execute command “devmgmt.msc” as an administrator. Fig. 1 Update the driver manually by selecting „Bizerba Gx USB“ from the driver list. As soon as the update is completed, the printer can respond. Step 3: Set up printer After preparation, the printer is ready to be set up. - Page 12 Then the USB hardware identification of the device is re-defined. Each GLP-80/160 printer has a universal USB hardware ID. Select the matching printer in the Windows dialog under manufacturer "Bizerba”. − The driver installed should be kept. You can now chose if you want to release the −...
-
Page 13: Step 4: Test Printout
GLP printer driver Installation Step 4: Test printout There are two options to start a test printout: Option “Print test page” in the printer properties. − Printout from an application. − The printout of a test page via printer properties only serves as a general functionality test. -
Page 14: Upgrade Of A Previous Installation (Only 32-Bit Setup)
Installation GLP printer driver Upgrade of a previous installation (only 32-Bit setup) For an existing installation of the GLP printer driver you can carry out an upgrade to the new version without uninstalling the old version. Close all other applications before starting the upgrade. Close the control panel and the status window of the printers. - Page 15 GLP printer driver Installation Fig. 6 Click “Next”. The upgrade process is started. The following occurs: − The actual program files and drivers are being installed − The existing printer settings are taken over and adapted Further process as with a standard installation. You might need to restart the PC after the upgrade is completed.
-
Page 16: Step 2: Rework
Installation GLP printer driver 4.6.2 Step 2: Rework Since the drivers for the existing printers were replaced, the operating system may change these printers to "off-line". Open the printer overview in order to set these printers “on-line”. Fig. 7 Check the GLP printer settings in the Control Panel: Fig. -
Page 17: Help Programs/Tools
GLP printer driver Installation Help programs/tools 4.7.1 GLP 80/160 configuration program The configuration program makes it possible to configure a GLP 80/160 connected to a serial interface: − Select the serial interface to which the GLP-80/160 is connected. − Go to “Auto connect”. −... -
Page 18: Modify Log Path
This help program is always installed. It makes it possible to adapt the log paths to the installed Bizerba programs. When changing the log path for the GLP printer driver, please, ensure that the printer queue should be stopped and restarted afterwards. - Page 19 If no GLP printer is connected via USB, activate option “View hidden devices” in menu “View”. Right mouse click on Bizerba USB driver and go to “Uninstall”. Repeat this process if necessary if USB drivers are installed for both device families (GLP 80/160, GLP 58).
Need help?
Do you have a question about the GLP Series and is the answer not in the manual?
Questions and answers