Adding rinse aid
Adding and dispensing process chemicals
Rinse aid
Rinse aid is necessary to ensure water does not cling and leave
marks on load items, and to help load items dry faster after they have
been reprocessed.
The rinse aid in the
automatically. For this, the container must be filled.
Rinse aid poses a health risk.
Residues of rinse aid remain on the surface of load items after they
have dried.
It is important to check the suitability of the rinse aid being used.
Do not fill with cleaning chemicals.
This would damage the reservoir.
Only fill the rinse aid reservoir with rinse aid for washer-disinfectors.
Open the door fully.
Unscrew the yellow lid with the symbol in the direction of the
arrow.
The container holds approx. 300 ml.
Add rinse aid only until it is up to the "max." mark on the edge of
the funnel.
Final rinse
program stage is dispensed
45