Clear History; Code Description; Alarm List - Everlasting LoStagionatore MEAT Series Use And Maintenance Manual

verified. The alarm condition of the appliance is also visualized by a signalling pop-up on the Home
screen. According to the alarm type, the appliance either continues the running process or automati-
cally pauses, stopping any fucntion. It is possible to cancel the whole list of recorded and recognized
alarms by pushing on the CANC

CODE DESCRIPTION

A0 Low internal temperature alarm
A1 High internal temperature alarm
A2 Minimum humidity alarm
A3 Maximum humidity alarm
A4 High safety temperature alarm
A5 Ambient probe alarm
A6 Evaporator probe alarm
A7 High temperature probe alarm
A8 Product probe alarm
A9 Humidity probe alarm
Safety thermostat intervention
A10
alarm
STAGIONATORE
function key. WARNING: it is not possible to delete a single alarm

ALARM LIST

CAUSE
internal chamber temperature
has exceeded set low limit
internal chamber temperature
has exceeded set limit
internal relative humidity
degree has exceeded set
minimum low limit
internal relative humidity
degree has exceeded set
maximum limit
evaporator chamber tempe-
rature has exceeded maxi-
mum set value
probe failure
probe failure
probe failure
probe failure
probe failure
evaporator chamber tempe-
rature has reached maximum
safey value
26

ClEAR HISTORY?

SOLUTION
faulty heater or too low set
humidity
check refrigerating unit and
internal fan functionality and
clean the condenser
too low set temperature,
not enough product inside
the chamber, not calibrated
probe
not enough product inside
the chamber, not calibrated
probe
check internal fan functiona-
lity
replace the probe (service);
then restore the alarm and
restart the cycle by pushing
the START key
check internal fan functiona-
lity. Once the problem is sol-
ved, reset the alarm (alarm
folder), unplug the appliance
and wait for some seconds
before plugging it in again.
The appliance will resume
operating with the running
recipe.