Status Connection; Led Status - Toro Tempus Air BW User Manual

Step 5
TM
LoRa

STATUS CONNECTION

The communication periodicity in LoRa
The communication interval of the LoRa
approximately 3 minutes.
TM
Status of LoRa radio communication between the modules and the Tempus Air BW. The icons indicate
when Tempus Air BW was last connected to the module via LoRa
you of the last connection."
Last connection < 6 minutes
Last connection >6 minutes
Changes not transmitted
Connection never done or very long
time without communication with the
gateway.

LED STATUS

INFORMATIONS ON THE STATUS OF THE TEMPUS AIR BW LED
• Green LED: normal running
• Green LED flashing : Firmware update in progress
• Red LED flashing 3 times :
Possible causes :
1. Loss of Wi-Fi access point (router) or connection not etablished.
Restart your router and the product.
2. During initialization, the password entered is not correct.
Trick : Enter the password of the your router in a « Notes » application on your mobile. Copy the password
with a long press and paste it into the corresponding field. Repeat the initialization procedure.
3. During initialization, the product may be too far from the box : bring the product closer.
•Red LED flashing 2 times : alarm time : the Tempus Air BW is no longer on time. If your product is connected
to the MyToroTempus platform, the time setting will be automatic. Otherwise, connect to the Tempus Air BW
from the application and check that the message « Synchronization OK » is displayed.
•LED off : the product is not powered.
MOUNTING (Outdoor Antenna)
In the case of mounting the antenna outdoors with the optional extension of 10 meters, we recommend
protecting the antenna with a plastic tube with an internal diameter of 15mm minimum. This tube will be
clogged on his upper part to protect the antenna from the rain. The cord will have to be protected by a sheath.
:
TM
mode
TM
radio between the Tempus Air modules and Tempus Air BW is
TM
. If you press the icon a message will inform
Toro Tempus Air BW
7