Advertisement
3. After a lapse of the standard charge time (8 hours),
remove the power plug from the outlet.
In order to deliver full performance of the battery:
(1) In the case of not using the shaver for three months or more,
charge before use.
(2) Even if the shaver stops moving, do not leave it with the switch
"ON."
(3) Do not charge every time you use the shaver.
(4) Charge within an ambient temperature range of 10 - 35 °C.
Names of parts and their functions (P.7)
Cap
Outer blade holder
Inner blade holder
Lock button : The switch is unlocked by pushing this button.
Switch : Slide this switch while pushing the lock button.
Battery (built-in) : Ni-MH battery: One
Charge indicator lamp (red)
Voltage selector knob
The factory setting is 200 - 240V. Set it to your regional voltage
before use.
Power plug : Insert into an outlet to the ends.
Slide button
Push in and push out the power plug by sliding this button while
lightly pushing it.
Cleaning brush
Safety precautions
Items described here are for using the product safely and properly,
and to prevent hazards and injury to the user and other persons
before they occur.
Items are classified as follows.
All items are important descriptions related to safety, therefore
make sure to observe them.
Outer blade (Replacement blade: K-37S)
Inner blade (Replacement blade: K-23U)
Trimming blade
Never fail to observe
Extent of imminent hazard which has the
potential to cause death or serious injury to
the user in the case of improper handling.
Extent of hazard which has the potential to
cause death or serious injury to
the user in the case of improper handling.
Extent of hazard or damage which has the
potential to cause injury to the user or
damage to physical property (houses and
household goods) in the case of improper
handling.
33
33
(P.8〜12)
Advertisement
