Solving Scanning Problems - Epson ET-4800 User Manual
Hide thumbs
Also See for ET-4800:
- Quick start manual ,
- User manual (288 pages) ,
- User manual (288 pages)
Table of Contents
Advertisement
• After you print, the colors in your printout need time to set as the ink dries. During this time, the colors
may look different than you expect. To speed up drying time, do not stack your printouts on top of each
other.
• Your printed colors can never exactly match your on-screen colors. However, you can use a color
management system to get as close as possible. Try using the color management options in your
printer software.
• Select Custom as the Color Correction setting on the More Options tab of the printer software, then
click Advanced. Try changing the Scene Correction setting to something other than Automatic. If
changing that setting does not work, change the Color Management setting to any color correction
method other than PhotoEnhance.
• For best results, use genuine Epson paper.
• If you have not used the product for a long time, run the Power Cleaning utility.
Note: Power Cleaning consumes a lot of ink, so run this utility only if you cannot improve print quality
by cleaning the print head.
Parent topic:
Related concepts
Print Head Nozzle Check
Print Head Cleaning
Power Cleaning
Related references
Paper or Media Type Settings - Control Panel
Paper or Media Type Settings - Printing Software
Compatible Epson Papers
Related tasks
Checking Ink Levels on Your Product
Selecting Basic Print Settings - Windows
Selecting Basic Print Settings - Mac
Related topics
Refilling Ink
Solving Scanning Problems
Check these solutions if you have problems scanning with your product.
Solving Print Quality Problems
280
Advertisement
Table of Contents
Need help?
Do you have a question about the ET-4800 and is the answer not in the manual?
Questions and answers
how to input sound on ET-4800 faxes
Hello, I need to replace the paper feeder tray for the epson et 4800. How can I get that part? Many thanks.
1. I can copy, but never from the top paper feeder 2. I can never print from the computer Had it "fixed" twice, always faults back Ready to give up, machine is a few moths old Highly recommended Replaced an old HP, never any problems but expense I really do not want to study hundreds off pages
Is the the epson et-48 user manual free to download
HOW DO I CLEAR INK PAD COUNTER
To clear the ink pad counter on the Epson ET-4800, follow these steps:
1. Download and install a waste ink counter reset utility.
2. Use the utility to reset the waste ink pad counter.
This will clear the error and allow the printer to resume printing.
This answer is automatically generated
How can I reduce the size of the image I want to copy?
To reduce the size of an image when copying with the Epson ET-4800, follow these steps:
1. Place the original document on the scanner glass or in the ADF.
2. Select Copy on the home screen.
3. Set the number of copies.
4. Choose either color copy or monochrome copy.
5. Press the OK button to check and adjust print settings.
6. Use the buttons to navigate to the copy magnification settings.
7. Adjust the magnification to a lower percentage to reduce the size of the image.
8. Press OK to confirm the settings.
9. Press the start button to begin copying.
This will copy the original at a reduced size based on the selected magnification setting.
This answer is automatically generated
HOW TO GET INTO PAPER FEEDER. THE PAPER WONT FEED AND FOLDS UP.
To access the paper feeder on an Epson ET-4800 when paper won't feed and folds up, follow these steps:
1. Check the Installation Location – Ensure the printer is on a flat surface and operating under recommended conditions.
2. Use Supported Paper – Verify that you are using paper types supported by the printer.
3. Follow Paper Handling Guidelines – Ensure proper paper handling to prevent feeding issues.
4. Load the Correct Number of Sheets – Do not exceed the maximum sheet capacity. For plain paper, do not load above the line indicated by the triangle symbol on the edge guide.
5. Adjust Paper Settings – Ensure the paper size and type settings on the printer match the actual paper loaded.
6. Access the Rear Paper Feeder – Pull out the paper support, slide the edge guides, and ensure the paper is loaded correctly.
If the issue persists, check for any paper jams and remove any stuck paper carefully.
This answer is automatically generated
were is the pause or trash key located on the epson 4800 printer
WERE IS THE PAUSE OR THE TRASH KEY ON A 4800 EPSON PRINTER
I can't move to the MULTIPLE COPIES -- I want to copy multiple copies from the feeder!
To copy multiple copies using the feeder on the Epson ET-4800:
1. Load paper in the rear paper feeder.
2. Place all originals face up in the Automatic Document Feeder (ADF) with the top of the page toward the left side. Do not exceed the maximum sheet limit indicated by the triangle symbol.
3. Select "Copy" on the home screen using the control panel.
4. Set the number of copies you want.
5. Choose color or monochrome copy.
6. Press OK to check and adjust print settings if needed.
7. Press the start (x) button to begin copying.
This answer is automatically generated