Related Manuals for Devine RX Series
Summary of Contents for Devine RX Series
- Page 1 RX Series (RX-10SA) Active Studio Subwoofer User Manual The information in this user manual is subject to change at any time without notice. Version 1.0 Date of creation and author's initials:21-07-2020 RV Revision date and author's initials: -...
- Page 2 Introduction Thank you for purchasing this Devine RX Series studio subwoofer. We advise that you read this user manual in its entirety before unpacking the contents of the box, so that you are familiar with all of the functionality that this product has to offer. Please be sure to check that all of the parts and accessories listed below under 'box contents' are included in the package.
-
Page 3: Safety Instructions
Safety Instructions WARNING! Keep this device away from moisture, water and rain to avoid the chance of electric shocks. Everyone involved with the installation, operation and maintenance of this device must: - Be qualified - Be skilled - Have read the instructions in this user manual - Be sure that neither the device nor the included accessories are damaged. - Page 4 - Should the device not be used in the manner described in this user manual, damages or even injuries could occur. Devine cannot be held responsible for any injuries or damages that occur as a result of improper use of this product.
-
Page 5: Overview Of The Device
Overview of the Device 1. Volume control 2. Low pass crossover (50 – 120 Hz) 3. Phase switch (0 / 180 degrees) 4. Stereo RCA inputs and outputs (unbalanced) 5. Left-channel XLR inputs and outputs (balanced) 6. Right-channel XLR inputs and outputs (balanced) 7. -
Page 6: Using The Subwoofer
Connecting the Subwoofer The Devine RX-10SA is ideally placed somewhere on the floor, but preferably not in a (far) corner to prevent dense sound effects. A tight sound is what’s usually desired. Try out different positions in the room with a basic set-up that can be easily moved around. - Page 7 – Acoustic interference that causes a ‘pounding’ sound effect. Experiment with the settings to find what best suits the situation. Status LED The subwoofer is equipped with a status LED on the front (behind the Devine logo) that lights up when it is powered on. Overload and security There is no overload indicator on this subwoofer because it is not designed to be used for listening at high volume levels, especially for longer periods of time.
- Page 8 Component and housing protection This subwoofer is not designed for mobile use. If it needs to be transported, it should be placed in the original packaging or in a suitable flight case with a foam inlay of sufficient thickness to protect it against damage. This subwoofer is not impact-resistant because it is designed to be placed in a permanent spot in your studio and because any metal or plastic protective grilles can negatively influence the sound.
-
Page 9: Troubleshooting
Troubleshooting If you have a problem with your subwoofer, you can consult this troubleshooting section for possible solutions. If, after consulting this section, the problem remains unresolved, please contact your retailer for more information and/or help. This troubleshooting section contains information on how to solve the most common studio monitor problems, but it does not and cannot cover every eventuality. - Page 10 connect all of your studio equipment to the same power group with no other devices attached. If this is not possible, experiment by connecting your devices to different power groups to see if that solves the interference problem. Audible resonance or Speakers not isolated from When your speaker is placed on a surface vibrations...
-
Page 11: Specifications
– Solid wooden housing – Black or white finish – Various connection possibilities (RCA, 6.35mm TRS jack, XLR) – Built-in adjustable crossover – Backlit Devine logo (status-indicator) – Built-in overload protection Technical specifications: – 10” aramid fibre-glass woofer – Amplifier power capacity: 225 Watts (dynamic) –...
Need help?
Do you have a question about the RX Series and is the answer not in the manual?
Questions and answers