Section 7 Additional System Configuration; Changing Passwords; Setting Date And Time - ABB ARR600 User Manual

1MRS758458 F
Section 7
7.1
7.2
ARR600
User Manual
Additional system configuration

Changing passwords

1. In the left pane, under Tools, select User Config.
2. Type the old password in the Old password field.
3. Type the new password in the New password field and the New password
(confirm) field.
4. Click Submit to save the settings.
See the cyber security deployment guideline for more information
on password configuration.

Setting date and time

1. In the left pane, under System, click Time.
2. Set Mode to Automatic (NTP) or Manual.
The "Automatic (NTP)" setting synchronizes the date and time with an
remote NTP (or SNTP) server. The NTP server always defines the time in
UTC time. The time zone can be set so that the device shows the time in a
local format. There is also an NTP server in the device (NTP client and
server), this enables the device to work as NTP server for the LAN devices.
3. Click Submit under the Mode setting.
The lower part of the view is updated if the setting changed.
4. Check the time and date settings.
• In the "Automatic (NTP)" mode, check the settings under Current
Time and Date (NTP mode), including Time zone, and click Test
NTP servers.
• In the "Manual" mode, enter the time and date in the Time and Date
fields, respectively.
Clicking Copy PC changes the device's time and date settings to match the
connected PC. This requires JavaScript support from the browser.
5. Click Submit to save the settings.
Additional system configuration
Section 7
31