User Interface; Setting Ethernet Port Function To Lan - ABB ARR600 User Manual

Section 4
Getting started
4.2.1
4.3
22
Example: The default IP address of the device is 10.10.10.10. The
corresponding address to enter in the browser is https://10.10.10.10/.
Ignore the browser's warning about a self-signed certificate.
4. Enter the username and password.
The default username is "arctic-adm" and the default
password is "arcticm2m". Change the password before
connecting the product to a public network.
5. Click Login.
The Home Page opens.

User interface

The user interface consists of views that can be opened from the menu in the left
pane.

Setting Ethernet port function to LAN

Changing Port function to "LAN" disables automatic IP address detection. If Port
function is set to the default value "auto", the Ethernet LAN port tries to
automatically obtain the IP address using DHCP when the device boots. If the
DHCP discovery fails, the device automatically uses IP address 10.10.10.10.
Change the following setting before changing any other Ethernet
settings.
1. In the left pane, under Network, click Ethernet Port.
2. Set Port function to LAN.
3. Click Submit to save the settings.
If the functional mode of the Ethernet port is set to "WAN" or "VLAN", the
following details must be noted. Before changing the Ethernet port mode to
"WAN", the firewall configuration needs to allow Web UI and SSH access from
WAN (Firewall/General and enable both Allow WebUI access from WAN and
Allow SSH access from WAN). The VLAN functional mode of the Ethernet port
requires an external VLAN switch.
1MRS758458 F
ARR600
User Manual