Verify Scanner's Firmware - Kodak S2000 Series User Manual

Verify scanner's firmware

A-61931 April 2021
Follow these steps to see if your scanner's firmware needs updating.
1. Determine your scanner's firmware version by doing the following
on the scanner:
S2040/S2050/S2070:
-Make sure your scanner is turned on and in the Ready screen.
-Press the button to display the Settings menu on the scanner's
display.
-Make sure 'Information' is selected/highlighted. You can use the
arrow buttons to change the highlighted selection.
-Press the button to display the scanner's information. The
scanner's current firmware version number is shown after
'Firmware:'. It will be a six-digit number.
-Press the button to exit the Settings menu.
-Press the button to return to the Ready screen.
S2060w/S2080w Scanner:
-Make sure your scanner is turned on and in the Ready screen.
-Press the button to display the Information menu on the
scanner's display.
-Scroll down to get the scanner's current firmware version number.
It is shown after 'Firmware:'. It will be a six-digit number.
-Press the button to exit the Information menu and return to the
Ready screen.
2. Determine the version of the firmware that is on the scanner's
product website:
-Go to your scanner's product support website:
S2040/S2050/S2070:
www.alarisworld.com/go/S2000install
S2060w/S2080w:
www.alarisworld.com/go/S2000winstall
-Scroll to the Firmware section that matches your scanner's model
name.
-If the version is not shown, then click the 'Release Notes' link.
3. If the firmware version number on the website is higher than the
scanner's firmware version, then you should update the firmware
version.
2 Installation
13