Vestil EPT Series Instruction Manual page 41

TABLE OF CONTENTS
Step 3: Use 10mm wrenches (or adjustable wrenches) to disconnect
the horn from the mounting plate.
Step 4: Disconnect cables I and G from the terminal on the top side of the FRC.
Step 5: Disconnect the spade terminals (locations shown in photograph below).
Red & Black wire
Green & Black wire
TABLE OF CONTENTS
Orange wire
Orange wire
Copyright 2021 Vestil Manufacturing
9/1/2021
Step 4: Disconnect cables B, A, F,
and C from the FRC, using either a
9/16
socket)
[Photograph
disconnection of A & F cables.]
Close-up side view of the terminal on
top of the FRC.
EPT MANUAL
inch crescent wrench
or a 14mm wrench.
below shows
I G
41
Page
(or
of 58