Ashtray Status - DOMUSA TEKNIK BioClass iC 66 Installation And Operating Instructions Manual

10.1 Ashtray status

When "Ashtray Empty Warning" function is activated (see
ashtray is full and must be emptied. The parameter
the screen shows the ash scale bar which indicates the fill level of the ashtray. When it is full, an
the ashtray"
warning is activated. Whenever the ashtray is emptied, it is necessary to set the
status"
parameter to "0" by pressing "-" for DHW
The display of the notices is as follows:
: Ashtray fill level between 0 and 75 %.
flashing: Ashtray fill level between 75 and 100 %.
and flashing: Ashtray fill level more than 100 %.
BIOCLASS iC 66
Mixing heating circuit nº 1 flow temperature set
point setting by means of the tactile button
(Only with Bio Hydraulic Kit option, not available for
BIOCLASS iC 66)
Actual mixing heating circuit nº 1 flow temperature.
(Only with Bio Hydraulic Kit option, not available for
BIOCLASS iC 66)
Mixing heating circuit nº 2 flow temperature set
point setting by means of the tactile button
Only with Bio Hydraulic Kit option, not available for
(
BIOCLASS iC 66)
Actual mixing heating circuit nº 2 flow temperature.
Only with Bio Hydraulic Kit option, not available for
(
BIOCLASS iC 66)
Actual outdoor temperature.
Only with Bio Hydraulic Kit option, not available for
(
BIOCLASS iC 66)
Heating circuits demand.
"Setup menu")
"Ashtray status"
(19)
.
(18)
(18)
, the boiler warns about the
allows checking the fill level and
.
.
"Empty
"Ashtray
39