Ibml ImageTracDS 1210 User Manual
  1. Manuals
  2. Brands
  3. Ibml Manuals
  4. Scanner
  5. ImageTracDS 1210
  6. User manual

Ibml ImageTracDS 1210 User Manual

Hide thumbs Also See for ImageTracDS 1210:
Table of Contents

Advertisement

Quick Links

Download this manual
Version 1.1
ImageTracDS 1210/1155
User's Manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ImageTracDS 1210 and is the answer not in the manual?

Questions and answers

Related Manuals for Ibml ImageTracDS 1210

Summary of Contents for Ibml ImageTracDS 1210

  • Page 1 Version 1.1 ImageTracDS 1210/1155 User’s Manual...
  • Page 2 Imaging Business Machines, LLC. ibml is shipping totally RoHS compliant machines to the European Community Members...

  • Page 3: Table Of Contents

    ImageTracDS 1210/1155 User’s Manual Table of Contents ..................................... 1 Device ..............................2 Unique Features ..........................3 Specifications ............................4 Major Component ..........................5 Consumables and Periodic Replacement Maintenance Parts ............7 1.5.1 Consumables and Replacement Cycle ................... 7 1.5.2 Warning Message for Replacement of Consumables ..............11 LED Indication and Operation Button ....................
  • Page 4 ImageTracDS 1210/1155 User’s Manual 3.4.1 Thin Sheet Scanning and Separating Force ................. 17 3.4.2 Scanning of Small (width) Slip ...................... 18 3.4.3 Automatic Scanning and Input Tray Position ................19 3.4.4 Manual Scanning ........................... 20 3.4.5 Scanning with Transparent Holder ....................22 3.4.6...
  • Page 5 ImageTracDS 1210/1155 User’s Manual 4.6.1 Image Sensor Test ......................... 29 4.6.2 Imprint Test ............................ 30 4.6.3 Sheet Counter Settings ......................... 33 4.6.4 Imprint Settings ..........................38 4.6.5 Power Save Mode Settings......................43 4.6.6 USB Operation Mode ........................44 4.6.7 Image Sensor Settings ........................45...
  • Page 6 Read this manual thoroughly before using the Image scanner and operate it properly. This manual is created for operators of the ImageTracDS 1210 scanner and describes how to operate it. Be sure to read this manual and understand the safety precautions and the instructions thoroughly before starting.
  • Page 7 Disclaimer Caution ibml does not take on any responsibility for any damage caused by inability or error in scanned or data abnormality. The user must be reliable for scanned data validation. ibml does not take on any responsibility for any damage caused by using a poor-quality sheet or sheet not up to standard.
  • Page 8 Safety Precautions Read the following safety precautions thoroughly. ● Be sure to follow the instructions and directions in this manual when using the device. ● Personal danger or damage to the device may occur when any of the precautions are ignored. ●...
  • Page 9 Power cable WARNING ● Be sure to use the power cable supplied with the device. If you use a power cable other than the one supplied, it may cause electric shock or a fire may occur. ● Do not stretch, push, bend, alter, or put an object on the power cable. If you do so, the power cable may get damaged, and you may get an electric shock or a fire may occur.
  • Page 10 WARNING Shock ● Do not apply shock to the device by dropping it or hitting it against an object. If you use the device after applying shock, it may cause electric shock or a fire may occur. Placement WARNING ● Do not put containers with water inside (e.g., vase or pot) or metal (e.g., paper clip) on the device.
  • Page 11 CAUTION Unauthorized use ● Do not use the device for any other purposes (e.g., as a step) than specified. The device may drop or fall and cause device failure or injury. CAUTION Cabling ● Route the cables so no person may be caught. If a cable catches someone's foot, a device failure or injury may occur.
  • Page 12 1. List of messages The following are a list of messages and locations of "Notes" throughout this manual. DANGER No description with the mark DANGER in this manual. WARNING No description with the mark WARNING in this manual except for Safety Precautions(this section).
  • Page 13 1.4 “NOTICE” Mark The table below shows contents with the mark “NOTICE” and section number described in section 1 or later of this manual. Contnets of CAUTION Section Do not put things on Top Unit. If you do, they drop or fall when you open the Main Unit or Top Unit.
  • Page 14 “NOTICE” Mark (continued) Contnets of CAUTION Section Do not clean the ultrasonic sensors with excessive force. 4-11 If you do, position detection may be affected, and malfunction may result. Make sure Top Unit is open while you replace the Ribbon Cassette. Or Ribbon 4-17 Cassette and Imprinter may be damaged.
  • Page 15 2. Installation CAUTION Location • This device weighs approximately 94 lbs (43 kg). At least 2 people are required to handle the device. Take stable posture when installing the device. • Be sure to hold the bottom of the device. If you hold input/output tray or other parts, the device may break or drop.
  • Page 16 Since outputs from scanner include these data, they need to be checked. NOTICE Misread • ibml does not take on any responsibility for any damage caused by inability or error in scanned or data abnormality. • The user must be responsible for scanned data validation. ibml does not take on any responsibility for any damage caused by using a poor-quality paper or paper which does not satisfy the device specifications.
  • Page 17 5. Safety Notice Label Safety Notice Label CAUTION There attached the Warning/Caution labels on the device at the locations where users need to be careful for their operation. Clean each safety notice label regularly so the text be read clearly. If the label is broken, contact the service personnel and ask for a new label.
  • Page 18 1.3 Specifications  1.4 Major Component  1.5 Consumables and Periodic Replacement Maintenance Parts  1.6 LED Indication and Operation Button  1.7 System for Scanning Operation  1.8 Software  1.9 Contents of Device Shipment Overview ImageTracDS 1210/1155 User’s Manual...

  • Page 19: Device

    Input Tray Windows 7/8/8.1 Ultrasonic Sensor (Transmitter) Control Unit Image Sensor (Front) Image Sensor (Back)  Scanning Operation An application program controls scanning operation, the scanner scans each sheet and transfers data to the host. Overview ImageTracDS 1210/1155 User’s Manual...

  • Page 20: Unique Features

    Equipped with up to 2 imprinters for printing on front and back side of paper 5 ultrasonic sensors Equipped 5 ultrasonic sensors for multiple feed detection Hand Feeding Scan a super long paper up to 1,500 mm (59 inch). Overview ImageTracDS 1210/1155 User’s Manual...

  • Page 21: Specifications

    *3: Scanning of long sheet (458mm - ) has some restrictions. *4: If the device is connected with a USB2.0 cable, or operated with a USB2.0 host controller, it performs as the USB2.0 (Hi-Speed) level. Overview ImageTracDS 1210/1155 User’s Manual...

  • Page 22: Major Component

    A push-push mechanism is used for opening and closing the cover. Imprint Cover (Back) Opens the cover when you replace the ink cartridge for printing on the back side. (option) A push-push mechanism is used for opening and closing the cover. Overview ImageTracDS 1210/1155 User’s Manual...
  • Page 23 Connect the device to host via USB cable Power Connector Connect power cable Main Power Switch Used for controling power state together with Power Switch on the front of the device. Setting Switch Used by only service personnel.Do not change the settings. Overview ImageTracDS 1210/1155 User’s Manual...

  • Page 24: Consumables And Periodic Replacement Maintenance Parts

    Since the ink cartridge bundled with the DS 1210 equipped the imprinter(option) is used for only printer check purpose at the device installation, the specifications of ink cartridge described in documentations provided by ibml for the DS 1210 shall not applied to them.
  • Page 25 P a r t N a m e Picture Pick Roller Separation Roller Reverse Roller Roller Set Pick Roller ×2 Separation Roller ×2 Reverse Roller ×2 Overview ImageTracDS 1210/1155 User’s Manual...
  • Page 26 Pick Unit assembly (Excluding rollers) *Although the pictures include rollers, the provided item does not include rollers. rear Reverse Roller assembly (Excluding rollers) *Although the picture include rollers, the provided item does not include rollers. Overview ImageTracDS 1210/1155 User’s Manual...
  • Page 27 No. Part Name Picture Ribbon cassette for front imprinting E-4181（Black）, Z-4181(Red) E-4181T(Black/Tank), Z-4181T(Red/Tank) Ink Cartridge for back imprinting Black：C6602A (option) Red：C6602R 1-10 Overview ImageTracDS 1210/1155 User’s Manual...

  • Page 28: Warning Message For Replacement Of Consumables

    *1: The warning for ink level will be displayed when the level become less than 10%. *2: The warning for expiration date for use will be displayed when 6 months have passed since ink level was reset. Overview 1-11 ImageTracDS 1210/1155 User’s Manual...

  • Page 29: Led Indication And Operation Button

    Ready Power on LED off Green Green fast blink Ready Scanning Ready Scan Green Green Green fast blink Resuming/Scanning Ready Power save mode Ready Power save Green Green Green fast blink Green Slow blink 1-12 Overview ImageTracDS 1210/1155 User’s Manual...
  • Page 30 The operations are as follows. Operation Button Action Press it shortly Restore from the Power Save Mode Press it longer Stop scanning and get the Input Tray down to the lowest position. than 1 sec Overview 1-13 ImageTracDS 1210/1155 User’s Manual...

  • Page 31: System For Scanning Operation

    1.7 System for Scanning Operation 1.7.1 System Configuration Application program Scanner Driver SCANNER CONTROLER - Application program should use the TWAIN driver. - Character recognition and image processing should be done by application programs. 1-14 Overview ImageTracDS 1210/1155 User’s Manual...

  • Page 32: Requirement For Pc Environment

    If the host systems do not satisfy the requirement, it might cause the following problems. Processor other than recommended･･･ Degradation of scanning speed or throughput Main Memory ･････････････････････ Memory shortage error or other memory errors Available Disk Volume ･･････････････ Unrecoverable error Overview 1-15 ImageTracDS 1210/1155 User’s Manual...

  • Page 33: Software

    Installed on DS 1210 or DS 1155 when using SoftTrac Capture Suite. Installed on DS 1210 when using third party application. DS 1155 Scanner Driver Installed on DS 1155 when using third party application. 1-16 Overview ImageTracDS 1210/1155 User’s Manual...

  • Page 34: Contents Of Device Shipment

    *1: Since the ink cartridge bundled with the DS 1210 equipped the back imprinter(option) is used for only printer check purpose at the device installation, the specifications of ink cartridge described in documentations provided by ibml for the DS 1210 shall not applied to them.
  • Page 35 1-18 Overview ImageTracDS 1210/1155 User’s Manual...
  • Page 36 Installation This chapter explains about scanner installation.  2.1 Power Supply  2.2 Space for Device Installation Installation ImageTracDS 1210/1155 User’s Manual...

  • Page 37: Power Supply

    PS outlet should be in Accordance with the National standard. (*2) Grounding Dedicated grounding line (*1) As needed basis, take measures to supply stable electrical power to the device. (*2) Examples North America : NEMA5-15R (15A/125V) Installation ImageTracDS 1210/1155 User’s Manual...

  • Page 38: Space For Device Installation

     Do not put things within about 300 mm from air vent. As the exhaust temperature is higher than ambient temperature, avoid working there for a long time.  The space shown above is a typical one.  Height required for installation is about 1000 mm. Installation ImageTracDS 1210/1155 User’s Manual...
  • Page 39 Installation ImageTracDS 1210/1155 User’s Manual...
  • Page 40 This chapter explains scanning and operation of scanner.  3.1 Power ON / OFF  3.2 Preparing to scan  3.3 Scanning Operation  3.4 Scanning features  3.5 Imprinting Operation  3.6 Multiple Feed Detection  3.7 Handling Paper Jam Operation ImageTracDS 1210/1155 User’s Manual...

  • Page 41: Power On / Off

     Power ON 1. Turn the power ON by pressing the "|" part of the Main Power Switch on the right side of the device. Main Power Switch Power Connector Operation ImageTracDS 1210/1155 User’s Manual...
  • Page 42 Main Power Switch Power Switch Power Power mode on the right side on the front side consumption ― Power Off mode < 0.5W Standby mode < 2W Sleep mode < 3W Ready < 50W Scanning < 235W Operation ImageTracDS 1210/1155 User’s Manual...

  • Page 43: Preparing To Scan

    Conditions of sheet sizes and thickness which can be scanned are shown below. Sheet Width (W) mm 105 127 153 170.2 64-128 g/m 52-157 g/m 132.6 41-143 g/m 164.4 64-143 g/m Non-carbon papers cannot be scanned 52-209 g/m Sheet Length (L) mm 64-104 g/m with Sheet Guide_S Operation ImageTracDS 1210/1155 User’s Manual...

  • Page 44: Adjusting The Output Trays

    2. Place the paper to scan into the Output Tray and align with the Output Tray Guide(L). 3. Adjust the Output Tray Guide(R) approx. 5 mm wider than paper width. 4. Slide the Output Tray Guide(L) to the left side. Output Tray Guide (L) Output Tray Guide(R) paper to scan Operation ImageTracDS 1210/1155 User’s Manual...
  • Page 45 1. If the Stopper 2 stands up, fold it and push back into the tray. Stopper 2 2. If the Extension Trays are extended, push them back into the trays. Extension Tray 1 Extension Tray 2 Operation ImageTracDS 1210/1155 User’s Manual...
  • Page 46 Adjust it approx.1.2 inch (3 scale increments) longer than the paper length. When scanning thin papers (less than 58 g/m2, 16 lbs), Adjust it approx. 1.6 inch (4 scale increments) longer. Stopper 1 paper to scan scale 5. Remove the paper in the Output Tray. Operation ImageTracDS 1210/1155 User’s Manual...
  • Page 47 2. Fold down the Stopper 1 then push it back into the trays as shown in the figure below. Stopper 1 3. Pull out the Stopper 2 from the tray then it will stand up. Stopper 2 Operation ImageTracDS 1210/1155 User’s Manual...
  • Page 48 When scanning thin papers (less than 58 g/m2, 16 lbs), Adjust it approx. 1.6 inches (4 scale increments) longer. Extension Tray 3 or 4 scale increments scale paper to scan 7. Remove the paper in the Output Tray. Operation ImageTracDS 1210/1155 User’s Manual...

  • Page 49: Preparing Documents

     Hold the edges firmly, and unbend the stack of papers. This will take in air between the papers.  Repeat this action two or three times.  Rotate the stack 90 degrees, and repeat the above process. Operation 3-10 ImageTracDS 1210/1155 User’s Manual...

  • Page 50: Adjusting The Input Trays

     Paper stack is not aligned to the left edge.  Paper stack is not straight.  The Sheet Guide is not touched to paper stack.  Height of paper stack is 55mm or more. Sheet Guide Operation 3-11 ImageTracDS 1210/1155 User’s Manual...
  • Page 51  Paper stack is not aligned to the left edge.  Paper stack is not straight.  The Sheet Guide is not touched to paper stack.  Height of paper stack is 55mm or more. Not touched Sheet Guide Not straight Operation 3-12 ImageTracDS 1210/1155 User’s Manual...
  • Page 52 Sheet Width (W) mm 170.2 41-143g/m 132.6 Thickness (41-143g/m 164. Mixable area 127-210 mm Length Mixable area 100-364 mm 64-143g/m Width Thickness (41-143g/m Mixable area Mixable area Sheet Length (L) mm 100-257 mm 127-210 mm Operation 3-13 ImageTracDS 1210/1155 User’s Manual...

  • Page 53: Scanning Operation

    1. Launch the application program on the host system. 2. Select the scanning job in the application program. 3. Start scanning from the host application. Do not add papers during scanning. 4. Remove the scanned papers from the Output Tray. Operation 3-14 ImageTracDS 1210/1155 User’s Manual...

  • Page 54: Scanning Features

     When scanning documents that shouldn’t be sparated like copy slip or envelope in continuous scan mode, select “None” for Seperation Force. But Manual Scanning is strongly recommended for those documents. Refer to “3.4.4 Manual Scanning” Operation 3-15 ImageTracDS 1210/1155 User’s Manual...

  • Page 55: Scanning Of Small (Width) Slip

    2. Place the small slips on the Input Tray and align it to the top edge and left edge. 3. Slide the Sheet guide to make the Sheet Guide_S touch the right edge of slips. Sheet Guide_S Width < 74 mm Sheet Guide Operation 3-16 ImageTracDS 1210/1155 User’s Manual...

  • Page 56: Automatic Scanning And Input Tray Position

    “Input Tray Position” parameter on feeding settings of the host application specifies the Input Tray position.  Normal: Descends to a bottom  Level 1: 5 mm descent  Level 2: 15 mm descent Operation 3-17 ImageTracDS 1210/1155 User’s Manual...

  • Page 57: Manual Scanning

    Push the Manual Feed Switch. It disables the Reverse Rollers and the multiple feed detection sensor automatically. Scan a sheet. Remove the scanned papers from the Output Tray. Pressing the Manual Feed Switch again resets this mode to the normal setting Reverse Roller Manual Feed Switch Operation 3-18 ImageTracDS 1210/1155 User’s Manual...

  • Page 58: Scanning With Transparent Holder

     If there is a blank in the transparent holder, a paper jam, noise and others may occur. Check the above-mentioned “Using transparent holder” for the details.  Use the sheet after removing clips or staples.  Do not fold or deform the transparent holder. It may affect the scanning. Operation 3-19 ImageTracDS 1210/1155 User’s Manual...

  • Page 59: Scanning Non-Carbon Paper

    To scan non-carbon sheet, it is important to feed one sheet by one and check image quality after scanning. Unit: mm Coloring may occur because of pressure by rollers Operation 3-20 ImageTracDS 1210/1155 User’s Manual...

  • Page 60: Scanning Long Sheet With The Extension Plates

    Output Tray (U) Extension Plate 2 Input Tray *1 The number of .paper sheets that can be set varies depending on thickness and textures of papers. Setting too much papers may cause paper jam or skew. Operation 3-21 ImageTracDS 1210/1155 User’s Manual...
  • Page 61 Then insert the Extension Plate between the Extension Tray 1 and the Extension Tray 2. Extension Plate Extension Tray 1 Extension Tray 2 Install the Extension Plate properly or paper jam or error may happen. Not between the Extension Tray 1 and 2 Upside down Operation 3-22 ImageTracDS 1210/1155 User’s Manual...
  • Page 62  Detaching the Extension Plates Hold the Extension Tray 1 and pull out the Extension Plates from the Input Tray and Output Tray (U) Output Tray (U) Extension Tray 1 Extension Plate Input Tray Operation 3-23 ImageTracDS 1210/1155 User’s Manual...
  • Page 63 4. Start scanning from the host application. Do not touch papers during continuous scanning. 5. The scanned papers eject to the Output Tray (U). Remove them from Output Tray (U). Operation 3-24 ImageTracDS 1210/1155 User’s Manual...

  • Page 64: Scanning Long Sheet With Hand Feeding

    Operation Button again. 4. When there are another sheets to scan, repeat the procedure from 2. 5. Hand Feeding mode is terminated by a long press of the Operation Button. Operation 3-25 ImageTracDS 1210/1155 User’s Manual...

  • Page 65: Imprinting Operation

    - Space used for these marks are equal to 6 digits for standard font size and 3 Characters digits for larger font size - In case of printing only “space”, “■ ■” will not be not printed. Color red / black Operation 3-26 ImageTracDS 1210/1155 User’s Manual...
  • Page 66  Example of imprinting (Rear) Imprint: Location-2 Imprint: one location or Deletion: Location-1 Location-1 Sequential No.: A00123 Sequential No.: A00012 Reverse direction Feed Feed Feed direction direction direction Location-2 One location or Reverse Location-1 Location-1 direction Operation 3-27 ImageTracDS 1210/1155 User’s Manual...

  • Page 67: Print Location

    ≒p * (the number of printed characters * 2 + 4) + 8 <Note> p: 2.62 mm/character for standard font size, 5.24 mm/character for larger font size <Note> L1 or L2 should not be larger than (L-10) Operation 3-28 ImageTracDS 1210/1155 User’s Manual...

  • Page 68: Anti-Redundant Scanning

    1. Pressing the Top Latch Button and open the Top Unit in the direction of the arrow Top Unit Top Latch Button Operation 3-29 ImageTracDS 1210/1155 User’s Manual...
  • Page 69 INSIDE Position is the spot where the Ribbon Cassette Tray stops when you push it in. 5. Close the Imprint Cover (Front). 6. Close the Top Unit by pushing the “PUSH” labels. Ribbon Cassette Tray Imprint Cover (Front) Inside Outside Ribbon Cassette Tray Operation 3-30 ImageTracDS 1210/1155 User’s Manual...

  • Page 70: Multiple Feed Detection

     If the multiple feed detection is disabled, this feature won’t work.  This feature is not applicable if mixed sheet thickness will be scanned.  In the case the 1st sheet has irregular thickness, the sensor detects difference of thickness at the 2nd sheet. Operation 3-31 ImageTracDS 1210/1155 User’s Manual...

  • Page 71: Handling Paper Jam

    Top Latch Button 2. Remove jammed document. CAUTION: The temperature of mechanism guide around the Imprinting may be high. NOTICE: As the printer ribbon is exposed it may get ink on your clothes. Document Ribbon Cassette Operation 3-32 ImageTracDS 1210/1155 User’s Manual...

  • Page 72: Recovery From Paper Jam In Main Unit

    Main Unit closes unexpectedly, Make sure you hold the Main Unit with your free hand while you work. 1. Push the Main Latch Button and open the Main Unit in the direction of the arrow. Main Unit Main Latch Button Operation 3-33 ImageTracDS 1210/1155 User’s Manual...
  • Page 73 NOTICE: Push until Main Unit latches completely by pushing PUSH Label. If you use the device when unlatched , it may cause paper jams, etc. PUSH label PUSH label Operation 3-34 ImageTracDS 1210/1155 User’s Manual...

  • Page 74: Handling Paper Jam When Using The Extension Plates

    3.7.3 Handling Paper Jam when using the Extension Plates When uisng the Extension Plates, close the device gently to avoid damage. Operation 3-35 ImageTracDS 1210/1155 User’s Manual...
  • Page 75 Operation 3-36 ImageTracDS 1210/1155 User’s Manual...
  • Page 76 To avoid failures caused by these parts, daily and preventive maintenance should be conducted. Related to the error messages on component life, contact ibml.  Maintenance by Users Daily maintenance and replacement of consumables have to be conducted by users.

  • Page 77: Maintenance Conducted By Users

    Reverse Rollers with gauze or wet cloth before operation every day or whenever an error occurs. Use gauze that is commercially available. Perforated sheets produce a lot of dust so more frequent cleaning is required. Maintenance ImageTracDS 1210/1155 User’s Manual...
  • Page 78  The locations of major components (Top Unit is opened.) [PC52] [PC42] Platen [PC41] [PC41] [PC42] [PC52] [PC51] [PC43] Maintenance ImageTracDS 1210/1155 User’s Manual...
  • Page 79  The locations of major components (Main Unit is opened.) Perforated sheets produce a lot of dust so more frequent cleaning is required. [PC11] [PC20] [PC31] [PC21L] [PC21R] [PC21R] [PC31] [PC21L] [PC20] [PC11] Maintenance ImageTracDS 1210/1155 User’s Manual...

  • Page 80: Cleaning

    3. If these will not have cleaned for a long, images may have lines vertically. Main Latch Button Image Sensor (Front) Main Unit Image Sensor (Rear)  Surface of the Image Sensor Glass Black Background White Background (Label) Maintenance ImageTracDS 1210/1155 User’s Manual...

  • Page 81: Cleaning Of Consumable Rollers

    Separator Rollers, and Reverse Rollers with gauze or the like. Pick Roller Separator Roller Reverse Roller 3. It will be easier to clean the roller surfaces if you remove the Pick unit and the Reverse unit from the scanner. Maintenance ImageTracDS 1210/1155 User’s Manual...

  • Page 82: Cleaning Of Detectors And Ultrasonic Sensors

    2. Clean the detectors (plastic tips of photo sensor) with gauze or the like and remove the paper dust and other objects attached to the surface of them. Sensor (PC21L) Sensor (PC11) Sensor (PC31) Sensor (PC21R) Sensor (PC20） Sensor (PC31) Sensor (PC21R) Sensor (PC21L) Maintenance ImageTracDS 1210/1155 User’s Manual...
  • Page 83 Twist gauze, damp cloth, etc. around fingers and clean the photo sensor. After cleaning, close the Reverse Cover. Gauze Reverse Cover Sensor (PC20) 5. Close the Main Unit by pushing the PUSH labels with both hands. Maintenance ImageTracDS 1210/1155 User’s Manual...
  • Page 84 2. Clean the detectors (plastic tips of photo sensor) with gauze or the like and remove the paper dust and other objects attached to the surface of them. Sensor (PC52) Sensor (PC42) Platen Sensor (PC20) Sensor (PC41) Sensor (PC42) Sensor (PC52) Sensor (PC51) Maintenance ImageTracDS 1210/1155 User’s Manual...
  • Page 85 3. Prepare appropriate width paper so that the paper can insert between the rollers. Then repeatedly insert and remove the paper between the rollers to clean the sensor. 4. Close the Top Unit by pushing the PUSH labels with both hands. Sensor (PC43) Maintenance 4-10 ImageTracDS 1210/1155 User’s Manual...
  • Page 86 1. Operate the Main Latch Button and open the Main Unit. 2. Clean the ultrasonic sensors with gauze or the like and remove the paper dust and other objects attached to the surface of them. Ultrasonic Sensors (Receiver) Ultrasonic Sensors (Transmitter) Maintenance 4-11 ImageTracDS 1210/1155 User’s Manual...

  • Page 87: Replacement Of Rollers

    1. Operate the Main Latch Button and open the Main Unit. 2. Hook your fingers on the upper part of the Pick Cover and pull down in the direction of the arrow to open the Pick Cover. Pick Cover Pick Unit assembly Maintenance 4-12 ImageTracDS 1210/1155 User’s Manual...
  • Page 88 4. Open the Pick Top Cover in the direction of the arrow. 5. Remove the Pick Shaft assembly and Separator Shaft assembly. Hook Pick Shaft assembly Pick Top Cover Pick Bottom Cover Hook Separator Shaft assembly Pick Top Cover Maintenance 4-13 ImageTracDS 1210/1155 User’s Manual...
  • Page 89 3. After you install a Separator Roller, in order for the Pulley (Separate) and the Separator Roller to fit together completely, rotate the Separator Roller with your palm a couple of times while pushing it firmly. Maintenance 4-14 ImageTracDS 1210/1155 User’s Manual...

  • Page 90: Replacement Of Reverse Rollers

    3. Pull the Reverse Cover assembly in the direction of the arrow to open the Reverse Cover assembly. Reverse Cover assembly 4. Lift up the Reverse Roller assembly and remove it. Reverse Roller assembly Maintenance 4-15 ImageTracDS 1210/1155 User’s Manual...
  • Page 91 Reverse Roller with your palm a couple of times while pushing it firmly. 8. Fully insert the Reverse Roller assembly into the grooves at both sides and close the Reverse Cover assembly. Not inserted: Not good Fully inserted: Good Maintenance 4-16 ImageTracDS 1210/1155 User’s Manual...

  • Page 92: Replacement Of Front Ribbon Cassette

    The outside position is the spot where the Ribbon Cassette Tray stops when you pull it out. The inside position is the spot where the Ribbon Cassette Tray stops when you push it in. Ribbon Cassette Tray Imprint Cover (Front) Maintenance 4-17 ImageTracDS 1210/1155 User’s Manual...
  • Page 93 Cassette Tray is at inside position.) Ribbon Cassette Tray 5. Pull out the Ribbon Cassette. Ribbon Cassette 6. Push the Ribbon Cassette Tray to the inside position where the Ribbon Cassette Tray stops when you push it in. Maintenance 4-18 ImageTracDS 1210/1155 User’s Manual...
  • Page 94 10. Close the Imprint Cover (Front). 11. Close the Top Unit by pushing the “PUSH” labels. 12. After replacing a Ribbon Cassette, confirm the printout quality is fine by running Imprint Test in Scanner Utility. Maintenance 4-19 ImageTracDS 1210/1155 User’s Manual...

  • Page 95: Replacement Of Rear Ink Cartridge

    Ink Jet Print assembly, you can release and fix the ink cartridge. • Ink cartridge installed to the device (when Imprint Cover (Rear) on the top of the device is open) Imprint Cover (Rear) Ink cartridge • Ink cartridge Nozzle Side Seal side Maintenance 4-20 ImageTracDS 1210/1155 User’s Manual...

  • Page 96: Expiration Date Of Ink Cartridge

    Therefore, do not install ink cartridge other than a new one. Do not replace with another ink cartridge in the middle. If you do, the ink cannot be estimated correctly for warning. Maintenance 4-21 ImageTracDS 1210/1155 User’s Manual...

  • Page 97: Replacement Of Ink Cartridge

    2. Remove a protective film on the Ink Cartridge. Do not touch the part that has been covered by the protective film during installation work. Discard the protective film. Do not reuse the protective film. Protective Film Ink Cartridge Maintenance 4-22 ImageTracDS 1210/1155 User’s Manual...
  • Page 98 1. Move the lever on the Ink Jet Print assembly in the direction of the arrow, and release the ink cartridge fixed. Ink Cartridge Lever 2. Grab the knob on the ink cartridge and pull the ink cartridge upward. Knob Ink Cartridge Maintenance 4-23 ImageTracDS 1210/1155 User’s Manual...
  • Page 99 A boss protrudes from the ink cartridge, so do not force the ink cartridge into the position. Knob Ink Cartridge 3. Move the lever on the Ink Jet Print assembly in the direction of the arrow to fix the ink cartridge. Ink Cartridge Lever 4. Close the Imprint Cover (Rear). Maintenance 4-24 ImageTracDS 1210/1155 User’s Manual...

  • Page 100: Cleaning Ink Cartridge

    Put the ink cartridge and the cases together into a commercially available plastic bag and store them. Cartridge The shape of the cases is designed so that the cases do not touch the nozzle side. Case Arrow Nozzle Side Maintenance 4-25 ImageTracDS 1210/1155 User’s Manual...

  • Page 101: Scanner Utility

    Cartridge Settings. The count for ink level warning and ink cartridge replacement warning for the ink cartridge starts when ink level is reset. Consequently, if you do not reset the ink level, replacement timing cannot be managed. Maintenance 4-26 ImageTracDS 1210/1155 User’s Manual...
  • Page 102 1. Start the Scanner Utility. (a) For Windows 7 Click the [Start] button. From the menu, select "All Programs" > "ImageTracDS 1210 Scanner" > "Utility for End User" and then click the [Scanner Utility]. (b) For Windows 8 / 8.1 Select "ImageTracDS 1210 Scanner"...
  • Page 103 • Image Sensor Test 4.6.1 • Imprint Test 4.6.2 • Sheet Counter Settings 4.6.3 • Imprint Settings 4.6.4 • Power Save Mode Settings 4.6.5 • USB Operation Mode 4.6.6 • Image Sensor Settings 4.6.7 Maintenance 4-28 ImageTracDS 1210/1155 User’s Manual...

  • Page 104: Image Sensor Test

    4. If the "Result" box shows "○", the levels of the image sensors are OK. Click the [End] button. Then return to the Menu Window. 5. Click the [End] to return to the Menu Window. Maintenance 4-29 ImageTracDS 1210/1155 User’s Manual...

  • Page 105: Imprint Test

    2. For the "Specifying sheet size", click the [Regular size]. Or click the [Specified size] and type in the paper size. • If you scan the [Regular size] sheet: Click the [Regular size] and select the paper size from the menu. Maintenance 4-30 ImageTracDS 1210/1155 User’s Manual...
  • Page 106 The printable characters are numbers (0 - 9), alphabet (A - Z), and marks such as hyphen, period, and exclamation point. Set a sheet whose size you selected on the Input Tray. Click the [Execute]. Maintenance 4-31 ImageTracDS 1210/1155 User’s Manual...
  • Page 107 In the window below for the Imprint Test, click the [Yes]. When the print test finishes, the window below is displayed. Click the [OK]. 7. Click the [End] to return to the Menu Window. Maintenance 4-32 ImageTracDS 1210/1155 User’s Manual...

  • Page 108: Sheet Counter Settings

    [How to replace the Reverse roller] button for the rollers to be replaced. Replacement procedure of the selected roller is displayed. Follow the description in the "Replacement of Rollers" to replace it with new one. Maintenance 4-33 ImageTracDS 1210/1155 User’s Manual...
  • Page 109 After you replaced rollers, in the Information display window, select check box in the "Reset sheet count" for the rollers you replaced. Click the [Execute] to reset the Sheet counts. Click the [Yes]. Click the [OK]. Maintenance 4-34 ImageTracDS 1210/1155 User’s Manual...
  • Page 110 Confirm that the Sheet counts are reset to 0 and that the replacement date has been updated. 7. Click the [End] to return to the Menu Window. Maintenance 4-35 ImageTracDS 1210/1155 User’s Manual...
  • Page 111 Manage settings corresponding to your scanning operation. 1. In the Sheet Counter Settings window, select the "Parameter Settings" tab. 2. Checkmark the "Roller replacement sheet count settings" to allow updating the replacement warning sheet count settings. Maintenance 4-36 ImageTracDS 1210/1155 User’s Manual...
  • Page 112 5. In the window below, click the [Yes]. Click the [OK]. 7. Confirm that the settings are changed correctly in the Parameter settings window. 8. Click the [End] to return to the Menu Window. Maintenance 4-37 ImageTracDS 1210/1155 User’s Manual...

  • Page 113: Imprint Settings

    2. Press the [How to replace the Ribbon Cassette(Front)] button or the [How to replace the Ink Cartridge(Back)] button. Selected replacement procedure is displayed. Follow the description and replace the ribbon cassette or the ink cartridge. Maintenance 4-38 ImageTracDS 1210/1155 User’s Manual...
  • Page 114 3. If you replace the rear ink cartridge, in the Information display window, checkmark the "Ink level reset" for the rear ink cartridge. Then click the [Execute]. 4. In the window below, click the [Yes]. 5. Click the [OK]. Maintenance 4-39 ImageTracDS 1210/1155 User’s Manual...
  • Page 115 "The number of printed sheets" is 0 (Sheets), "Cartridge replacement date" is updated, New ink cartridge should be checked to print out characters properly by running the Imprint Test. 7. Click the [End] to return to the Menu Window. Maintenance 4-40 ImageTracDS 1210/1155 User’s Manual...
  • Page 116 “Inkpad replacement warning timing setting” check box to allow updating corresponding settings.*1 Then click the [Execute]. *1: If you select "Do not report", the warning message will not be displayed. Recommend not select this option in order to manage ink level properly. Maintenance 4-41 ImageTracDS 1210/1155 User’s Manual...
  • Page 117 3. In the window below, click the [Yes]. 4. Click the [OK]. 5. Confirm that the settings are changed correctly in the Parameter Settings window. 6. Click the [End] to return to the Menu Window. Maintenance 4-42 ImageTracDS 1210/1155 User’s Manual...

  • Page 118: Power Save Mode Settings

    6. Click the [End] to return to the Menu Window. In Power Save Mode, the LED indicator is blinking slow with green color. Start scanning or press the Operation Button to resume from Power Save Mode. Maintenance 4-43 ImageTracDS 1210/1155 User’s Manual...

  • Page 119: Usb Operation Mode

    1. In the Menu Window, select the [USB Operation Mode] and click the [Execute]. The USB Operation Mode window is displayed. In the Transfer mode, "Super Speed(USB3.0)" or "Hi-Speed/Full-Speed(USB2.0)" is displayed. 2. Click the [End] to return to the Menu Window. Maintenance 4-44 ImageTracDS 1210/1155 User’s Manual...

  • Page 120: Image Sensor Settings

    White level reduction warning indicates exceeding product lifetime or malfunction. When it is displayed, contact the service personnel. 4. Click the [Execute] to update the setting. 5. Click the [End] to return to the Menu Window. Maintenance 4-45 ImageTracDS 1210/1155 User’s Manual...
  • Page 121 Maintenance 4-46 ImageTracDS 1210/1155 User’s Manual...

This manual is also suitable for:

Imagetracds 1155

Table of Contents