1.
Using a flat headed screwdriver, turn the two spring-loaded catches one
quarter turn anti-clockwise.
2.
Holding the catches, pull the battery assembly clear of its slot in the power
meter.
3.
Support the closure assembly on a flat surface.
4.
Pinch the release tab between finger and thumb while -
5.
lightly pressing down on the battery module.
Replacing the battery is basically a reversal of the removal procedure.
Release Tab
6
4
Battery
Module
Figure 2
Battery Removal/Replacement
Battery Removal/Replacement
2
5
Closure
Assembly
EPM-P Battery Operation
1
3