Advertisement
Description of functions
The bikespeed-RS removes the limit at 25 km/h of your pedelec. All other
features and functions of your bike remain as usual. This also includes the
protective measures installed by the manufacturer (e.g., short circuit,
overcurrent, power, torque, temperature, etc.), except for the safety
device for limiting the maximum speed.
After activating your pedelec the bikespeed-RS Tuning will show an
animation of the trip-time. After 3 seconds the number 1 appears on the
display. If the displayed time runs from 00:00 to 11:11 your pedelec will
supports motor power even if you exceed 25 km/h. If the displayed time
runs from 11:11 to 00:00 the motor support will end at 25 km/h.
To switch on or off the support above 25 km/h please change the level of
support down, up, down, and up again. If the procedure was successful
you will see the animation of the trip-time once more just like when you
activate your pedelec and this way you are informed about the current
setting.
Here is an example beginning on the "Normal" level:
Pushbutton down (new level: "Eco")
Pushbutton up (new level: "Normal")
Pushbutton down (new level: "Eco")
Pushbutton up (new level: "Normal")
Please enter the combination quickly without a pause of 3 seconds
between two keys. Repeat the procedure, if necessary, to obtain the
desired setting.
page 9
Advertisement
