Page 1
In order to continue serving our customers and providing the best products, our product information including our user manuals may receive updates from time to time. Please check our website for the latest user manuals and product materials. Version 2.0 9/3/20...
1.1 Introduction This user manual will guide you through the functions and usage of your TURBOLOCK TL117 Bluetooth-enabled Smartlock. It is important that you follow all instructions and regard all notes that appear throughout this manual. Consult this manual before you attempt to use your lock.
The substances contained inside the battery present chemical risks to the environment. The recommended disposal for any TURBOLOCK TL117 at its end-of-life is to dispose of the entire unit at or through an e-waste recycling center, program, or facility. Local regulations and laws pertaining to the recycling and disposal of certain types of batteries and/or products containing them will vary according to country, state, and local governments.
Section 2 Package Contents & Overview 2.1 Contents TL117 Bluetooth-enabled Smartlock x 1 Inside Knob x 1 Latch Assembly x 1 Wood Screws x 6 Mounting Screws x 2 Plate x 1 Keys x 3 the closest point towards 1.Switch must the lock.
• Entering a keypad passcode incorrectly 5 times in a row will activate Security Lockdown mode. During this mode, the keypad will be inoperable and the only way to unlock the TL117 is with one of the physical keys, including as a backup. This is a security feature.
Page 8
Admin generates and shares e-keys through the Tubolock Plus app. In order to use the e-key, however, the person being shared with must also download the Turbolock Plus app and register for an account. Once logged in, the trusted users can receive and use e-keys.
• For easier installation, have another person help to hold the lock. • Remove all parts of any old lock before installing the TL117. In some cases, the old strike plate and/or box may be used. • For your convenience, installation instructions are broken into segments.
Page 10
(Fig. 4) (Fig. 5) Part 3 - Installing the Strike In most cases, the existing strike plate and setup can be used. If you wish to use the one included with your lock, skip to Section 4.1, Part 3. TURBOLOCK TL117...
Step 4. Gently thread the power cable through the square hole of the plate. Then 门框锁扣盒及锁扣板安装图 Mounting Vertical use the 2x mounting screws to fasten the plate to the back of the door. Make Screws x 2 latch pin sure all screws are tightened (Fig. 8). 4.将钥匙插入锁芯,把锁舌旋转出锁芯,并至锁尺旋转至横状(如下图)。 Power Cable Bolt Fig. 8 TURBOLOCK TL117...
Page 12
Step 9. The lock should now be ready to use. It’s highly recommended to use the default passcode to 4 x Batteries test the lock to make sure it works before closing the door. See Section 6 for information on the default admin passcode. TURBOLOCK TL117...
This section details installation steps needed if you are installing the TL117 on a door without a cutout. If you are using the TL117 to replace an old lock or if your door otherwise already has a cutout, please go back to Section 3.
Page 14
(Fig. 14) (Fig. 15) once in a while to see if it sits flush. If not, chisel a little more and check again. Be careful not to chisel too deep; otherwise, the lock may not function correctly after installation. TURBOLOCK TL117...
Page 15
(aka “mortise”) more square. If you choose to use the strike box, you may need to chisel slightly deeper (Fig. 18). If using a spade bit, do not drill at high speeds as this may tear out extra wood and/or damage the door or doorframe. (Fig. 18) TURBOLOCK TL117...
Page 16
Step 9. Position the strike and strike box. Add the two remaining wood screws and use a screwdriver (not included) to secure them (Fig. 19). TURBOLOCK TL117...
Mounting Vertical use the 2x mounting screws to fasten the plate to the back of the door. Make Screws x 2 latch pin sure all screws are tightened (Fig. 8). 4.将钥匙插入锁芯,把锁舌旋转出锁芯,并至锁尺旋转至横状(如下图)。 Power Cable Bolt Fig. 8 TURBOLOCK TL117 注意:用钥匙旋转锁尺为横状。 5.将连接线插入室内面板。...
Page 18
Step 9. The lock should now be ready to use. It’s highly recommended to use the default passcode 4 x Batteries to test the lock while the door remains open to make sure it works before closing the door. See Section 6 for information on the default admin passcode. TURBOLOCK TL117...
The admin passcode must be changed from the default. Refer to Section 6.1 Changing the Admin Passcode. The TL117 can also be unlocked using e-keys shared through the Turbolock Plus app. E-keys are always logged by the Turbolock Plus app’s Unlock Records (see Section 8.3 App Usage).
Keypad passcodes can be created so that more people can gain entry access as needed. USE WITH CAUTION. Anyone with the keypad passcode can unlock the TL117 until the keypad passcode is deleted. If more control is needed, refer to Section 8.
’ before the keypad turns off. Step 4. After the voice confirmation (“All user passcodes successfully deleted”), the keypad will turn off. All passcodes are now deleted. Step 5. Test all previous keypad passcodes. They should now be unusable. TURBOLOCK TL117...
As long as the correct passcode sequence is entered, regardless of how many digits were entered before or afterwards, the TL117 will unlock. For example, if your user Passcode is “080808”, you can successfully unlock the TL117 by entering “11354080808”, “11080808”, “10808081” and so on.
To get the app, follow the instructions below. 8.1 App Installation Step 1. On your smartphone, search for the “TurboLock Plus” app in the Google Play or App Store. Step 2. Download and install the app.
Page 24
“To restore the default factory setting, please press 5.” Step 2. Press ‘5’ followed by ‘ ’ before the lock’s backlight turns off. The TL117 will confirm “Restore factory settings,” then flash three times. After the voice confirmation (“Success”), the TL117 is now reset.
Bluetooth status icon is lit off ( ). Fig. 25 Unlock Records: Tap to view recent unlock records, even if the Bluetooth status icon is lit off ( ). Reset Admin: Tap to reset admin passcode. Bluetooth status icon must indicate successful connection ( ). TURBOLOCK TL117...
For users without the TurboLock Plus app, the Admin can generate a 4 or 6-digit passcode that users can manually enter on the TL117 keypad to unlock. This 4 or 6-digit code can be revoked at any time by the Admin. This is a temporary unlock code that can be used 1-3 times, as assigned by the Admin.
8.5 Managing User Passcodes (E-Keys) User Passcodes (E-Keys) are generated on the TurboLock Plus app by the Admin and shared with a user. That user must install the TurboLock Plus app on their smartphone and register for a TURBOLOCK account. Every e-key use is logged in the Turbolock Plus Lock Access history log.
Step 1. Remove the cover from the battery compartment at the back of the lock. Step 2. Press and hold the little black button above the battery compartment for ~5 seconds. The TL117 will confirm “Restore factory settings,” then flash three times. After the voice confirmation (“Success”), the TL117 is now reset.
• After cleaning with a cleaner or detergent, wipe off any residue using a second non-abrasive cloth. Be sure to dampen the cloth with clean (purified) water. • The TL117 meets IP65 water-resistance. It can withstand splashes and contact with water once properly installed; however, do not submerge the lock.
Page 31
The batteries are entirely dead and/ Replace the batteries. or were not replaced in a timely Use one of the physical keys to lock and unlock the TL117. Replace manner. the batteries. Use the emergency power port to power the lock so that the door opens.
Page 32
(see Section 6). You will need to pair the TL117 to your smartphone again. See Section 8.2 for details. If none of the above resolves your issue, please visit our website at www.turbolock.com or contact customer service at 855-850-8031. TURBOLOCK TL117...
Warranty services are provided by TURBOLOCK Warranty Pro (“WP”). If a hardware defect arises and a valid claim is received within the Warranty Period, at its option and to the extent permitted by law, WP will: (1) repair the hardware defect by using new or refurbished parts that are equivalent to new in performance and reliability;...
Page 34
THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU. THE DURATION AND REMEDIES OF ALL IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE LIMITED TO THE DURATION OF THIS EXPRESS LIMITED WARRANTY. TURBOLOCK TL117...
Need help?
Do you have a question about the TL117 and is the answer not in the manual?
Questions and answers