Base Installation; Buttons On The Tv - JVC AV-HQ657115A User Manual

Important: The TV stand must be installed correctly before using the TV, unless the TV is wall-mounted. Incorrect
installation can result in damage or injury due to tip-over.
Note:
- Make sure the AC cord is not connected to the power outlet.
- Before starting assembly, make sure that you have a clean, safe and cushioned space to work in order to avoid
any damage to the TV.
- Do not touch or press the TV screen, the glass might break under pressure.
1. Carefully place the TV screen face-down on a clean, cushioned surface.
2. Insert and secure the stands with the screws provided as shown (2 screws on each side).
65":Screw size: M5x30mm
Note: Illustrations below are provided for reference only and may differ from actual product appearance.
MODEL:AV-HQ657115A
1. button
\
Scans up/down through the channel list. In the menu system, these act like the up/down direction buttons on the
remote and adjust menu controls.
2. button
\
Increases/decreases the volume.In the menu system,these act like the right/left direction buttons on the
remote and adjust menu controls.
3. button
/
Turn the TV on or switch it to standby. When the TV is on, short press it to confirm items; long press it to bring up
the menu.
Note: The location and names of the function buttons and power button on the TV may vary according to TV model.

Base Installation

55":Screw size: ST5x30mm
and AV-HQ557115A

Buttons on the TV

50":Screw size: M5x30mm.
4
MODEL:AV-HQ507115A