Parameter Adjustment - Vega VEGAPULS C 21 Operating Instructions Manual

7 Setup with smartphone/tablet (Bluetooth)
Connected
Change device code
Enter parameters
24
After connection, the sensor adjustment menu is displayed on the
respective adjustment tool.
If the Bluetooth connection is interrupted, e.g. due to a too large
distance between the two devices, this is displayed on the adjustment
tool. The message disappears when the connection is restored.
Parameter adjustment of the device is only possible if the parameter
protection is deactivated. When delivered, parameter protection is
deactivated by default and can be activated at any time.
It is recommended to enter a personal 6-digit device code. To do this,
go to menu " Extended functions", " Access protection", menu item "
Protection of the parameter adjustment".
7.3

Parameter adjustment

The sensor adjustment menu is divided into two areas, which are
arranged next to each other or one below the other, depending on the
adjustment tool.
•
Navigation section
•
Menu item display
The selected menu item can be recognized by the colour change.
Fig. 20: Example of an app view - Setup measured values
Enter the requested parameters and confirm via the keyboard or the
editing field. The settings are then active in the sensor.
Close the app to terminate connection.
VEGAPULS C 21 • Modbus and Levelmaster protocol