Operating The Lift - Toro 07344 Operator's Manual

7. Rotate safety blocks 90 degrees in channel and
secure to ends of lift frame with retaining pins
(Figure 22).
Figure 22
Platform lift can crush and cause personal
injury.
• Never work under raised platform without
lift safety blocks installed.
• Never use safety blocks to support a load
on lift.
8. Press "DOWN" button on pendant control and
lower lift until rollers gently contact safety blocks.
9. To remove safety blocks:
• Raise lift slightly.
• Remove retaining pins.
• Return safety blocks to storage position.
• Secure with retaining pins.

Operating the Lift

The 1/3 platform lift is designed to be used only with
a Workman Vehicle and must be mounted with the
wiring harness, level, decals, switches and all interlock
switches installed.
Improper operation of platform lift may cause
serious personal injury or death. To reduce risk
to operator and bystanders:
• Read and understand all safety instructions
in Workman and Platform Lift Operator's
Manuals and warning labels.
• Never use a platform lift without proper
training and authorization.
The electrical control system of the lift requires the
vehicle to be parked on a slope of less than a 5 degree
angle, parking brake engaged and the vehicle key in the
"Off " position in order to activate the lift circuit.
Operating
1. Set parking brake and chock wheels.
2. Rotate vehicle key switch to "Off" position.
3. Climb into platform and secure safety chains across
entry (Figure 23).
1. Safety chain
4. Grasp pendant control and rotate lift key switch to
"On" position.
5. Press "UP" button to raise lift; "DOWN" button
to lower lift.
16
Figure 23
2. Pendant control