Navitel R2 User Manual page 7

6 | USER MANUAL
EN
Lock file
Stamp
G-sensor
Parking monitor
Battery
LCD OFF
USB-connection *
* This function is available only in firmware version 20200505_AC5601 and higher.
In Record mode (REC), press Mode to protect the current recording. A key symbol will appear at the bottom of the
screen. Press again to remove protection. In Playback mode, select a file, press Menu and select Protect, then Lock
Current or Lock All. Protected files cannot be deleted or overwritten. Select Unlock Current / Unlock All to remove
protection.
This function adds date stamp to the record.
If the vehicle is hit by something, the DVR will automatically lock the current video.
In shutdown state, if vibration is detected, the device will turn on automatically and start recording. The file will be
protected (locked).
Red indicator lights up when the device is plugged into an external power supply; as the battery is charging, the red
light becomes green.
The device can automatically shut off the screen to reduce power consumption; time interval can be set in the LCD
OFF menu.
When connecting the device to a PC using a USB cable, two connection options will appear:
1) Mass Storage: play, copy and delete files.
2) Record: standard mode.