Page 1
Thank you for purchasing this NAVITEL® product. NAVITEL R1000 is a multifunctional high-definition DVR with many functions and features that are described in this User Manual. Please, read the manual carefully before using the device, and keep it for future reference.
Page 2
Buttons Button Functions Press and hold for 3 seconds to turn the device on/off. Power Press to switch between Video Record, Capture, and Playback modes. Press to exit any selected menu. Menu Press to access Mode Settings menu. Press again to access Setup menu. In Video Record mode, press to start recording;...
USER MANUAL Specifications Supported; built-in Processor MSTAR MSC8328 antenna 1.2” TN Display Power USB 2.0 DC 5 V 1-1.5 A Recording format Frequency 50 Hz / 60 Hz 1080 FHD 1920x1080 P Video resolution 180 mAh 3.7 V /30 fps Battery Rechargeable battery Image format...
Device functions Video Connect the device to an external power supply, put the microSD card in and it will start recording auto matically (indicated by the flashing blue light). Press the OK button to stop recording (the blue light will become steady).
Page 5
USER MANUAL Loop recording This setting allows saving the recording in separate files every few minutes. For example, if set to 60 seconds, 10 minutes of footage will be saved as 10 one minute fragments. If the memory card is full, all unprotected files will be overwritten in the order they were created.
DVR installation 1. Put the miscroSD card into the DVR. Use a high-speed SD card (Class10 or above); capacity should be within 8-64 GB. 2. Secure the device on the windshield with the bracket. 3. Connect the car charger to the cigarette lighter socket. 4.
Page 7
USER MANUAL Wi-Fi app installation 1. In the Settings menu of your DVR choose App QR Code, scan the code with your mobile phone to download DVR Wi-Fi sharing application. Install it after completion of downloading. 2. Choose Wifi in Settings menu, press On. 3.
Page 8
FCC Caution. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Need help?
Do you have a question about the R1000 and is the answer not in the manual?
Questions and answers