108: Magstripe Read No Data; 109: Print Ribbon Problem - DataCard SD260 Installation And User Manual

108: Magstripe read no data

The printer did not find any magstripe data
on the card.
To read the card:
1.
Insert a magnetic stripe card with data.
2.
Position the card with the magnetic
stripe down and to the right side of the
printer.
3.
Send the new card to the printer.
HINTS & TIPS
• The card might have been turned the wrong way.
• The card might not have a magnetic stripe.

109: Print ribbon problem

The print ribbon is not moving properly.
To fix the ribbon:
1.
Open the printer and remove the
ribbon cartridge.
2.
Fix the ribbon and move the repaired
area one full turn.
3.
Replace the ribbon cartridge and close
the printer.
HINTS & TIPS
• Remove any debris from the print area.
• If the card is in the printer, turn the knob to move the card so the printer can
eject it.
79