Cleaning The Brushroll; Cleaning The Soft Roller - Shark Duo Clean AX910UK Series Instructions Manual

MAINTENANCE - CONT�
WARNING: To reduce
the risk of shock and
unintended operation,
turn off power and
unplug unit before
servicing�
TIP: You can also check
for blockages in the hose
and tubes. Just remove
the floor nozzle, dust cup,
and hose, and shine a
flashlight in the openings.

CLEANING THE BRUSHROLL

1
Push up both sliders on floor nozzle at the same time to
pop up the brushroll lid.
2 To remove any string, hair or debris that may be wrapped
around the brushroll, use scissors to cut along the groove in
the brushroll.
19
0800 862 0453

CLEANING THE SOFT ROLLER

1
To remove Soft Roller from nozzle, lift it out
by the pull tab on the right side.
2 You can also tap loose debris off the Soft
Roller, or wipe it clean with a dry towel. If
you see any hair build-up or fibres caught in
the teeth behind the Soft Roller, wipe clean
with a dry towel.
3 Wash the Soft Roller as needed. Use only
water, and let air-dry completely for at least
24 hours.
4 Reinsert Soft Roller under rubber bumper in
front of nozzle until it clicks into place.
CHECKING THE NOZZLE FOR BLOCKAGES
1
Tilt neck of nozzle back to straighten the
airway, then remove any blockages from
nozzle.
s h a r kc l e a n . e u
20