Table of Contents
Advertisement
Other problems
Problem
There are humming
noises
A programme does not
start
Only the Start/Add
laundry sensor control
flashes slowly when the
programme is running.
The tumble dryer is
switched off.
The interior drum light-
ing does not come on
Cause and remedy
The compressor is operating.
These noises are quite normal and do not indicate a
fault.
No obvious cause.
Connect the tumble dryer to the mains
Turn on the tumble dryer
Close the door
Check whether the mains fuse has tripped
Has there been a power cut? When power is restored
any previously running programme will restart auto-
matically.
Once the programme has been running for
10 minutes, the indicators go out. The Start/Add laun-
dry sensor control flashes slowly. This is not a fault,
but a normal function to help save energy.
Touch a sensor control to switch on the indicators.
See " Control field standby status" in "Program-
mable functions".
The tumble dryer switches off automatically after
15 minutes if no further selections are made. This is
not a fault, but a normal function.
Select a programme.
The drum lighting will switch off automatically ...
... when the door is closed.
... after a few minutes when the door is open (to save
energy).
If the dryer is switched on, the drum lighting will
come on when the door is opened.
Problem solving guide
51
Advertisement
Table of Contents
