Cleaning The Plinth Filter; Cleaning The Plinth Filter Panel - Miele TSB 143 WP Operating Instructions Manual

Cleaning and care

Cleaning the plinth filter

 Pull the handle out of the plinth filter.
 Clean the filter thoroughly under run-
ning water.
 Squeeze the water out of the plinth
filter thoroughly.
The plinth filter must not be replaced
dripping wet. This can cause a fault.
 Use a damp cloth to remove any fluff
from the handle.
44

Cleaning the plinth filter panel

 Use a damp cloth to remove any fluff.
Make sure that you do not damage
the rubber seal when doing this.
 Check whether the cooling fins are
blocked with fluff (as follows).