Restoring A Nuisance Channel; Call Alert Paging; Receiving A Call Alert Page; Sending A Call Alert Page - Motorola APX 7000 User Manual

• or to Nuis and press the Menu Select button directly below Nuis.
The radio continues scanning the remaining channels in the list.
2.5.4

Restoring a Nuisance Channel

Procedure:
To restore the deleted nuisance channel, perform one of the following actions:
• Stop and restart a scan.
• Mode change to another channel and back to the original channel.
• Turn off the radio and then turn it on again.
Nuisance mode delete can be disabled by the system administrator.
2.6

Call Alert Paging

This feature allows your radio to work like a pager.
If other users are away from their radios or if they are unable to hear their radios, you can send them
an individual call alert page. You can also verify if a radio is active on the system.
Depending on how your radio is programmed, if there is no answer after the maximum ring time or
when you press the PTT button for an Enhanced Private Call, the radio automatically sends a call alert
page.
NOTICE: This feature must be preprogrammed by a qualified radio technician.
2.6.1

Receiving a Call Alert Page

When and where to use: When you receive a Call Alert page, you hear four repeating alert tones and
the LED blinks green. The call received icons blinks and the display shows Page received.
Procedure:
Press any button to clear the Call Alert page.
See Making a Talkgroup Call on page 58
information on returning the call.
2.6.2

Sending a Call Alert Page

When and where to use:
Do one of the following to send a call alert page:
NOTICE: If the feature inactivity timer is enabled, your radio automatically exits the feature
when your radio is left idle long enough for the time to expire. You hear the Menu Inactive Exit
Tone upon feature exit.
Procedure:
• Sending a call alert page using the preprogrammed Quick Access (One-Touch) Call Alert
Paging button:
or Making a Private Call (Trunking Only) on page 58
6875945M01-NL
Advanced Features
for more
79