6875945M01-NL
Advanced Features
2.26.7
Scenario of Changing from LTE-enabled Channel to Unprogrammed
Channel
When entering a unprogrammed channel the display prompts Unprogrammed and the LTE menu
dissapears. Pressing the LTE button prompts short, low-pitched tone.
If the display is showing LTE screen when entering the unprogrammed channel, the display returns to
Home screen immediately and you are unable to see nor access the LTE screen.
2.26.8
Scenario of Entering or Exiting Out-of-Range Site
When the radio moves beyond the LTE network coverage, which means out-of-range, the radio
prompts No LTE service. The LTE screen is accessible. Refer to
page 148
for the status shown at the LTE screen.
With the LTE of the radio turned on, when the radio moves back to LTE connected site, the radio
prompts LTE connected.
2.27
Utilities
This chapter explains the operations of the utility functions available in your radio.
2.27.1
Viewing Recent Calls
When and where to use: This feature allows you to view the recent incoming and outgoing call
information of the following call types:
•
Call Alert
•
Selective Call
•
Private Call
•
Phone Call (Outgoing Only)
•
Emergency Call (Incoming Only)
NOTICE: The radio can also be preprogrammed to log only the radio IDs associated with
incoming Dispatch Calls. Check with your dealer or system administrator for more information.
Do one of the following to view recent calls. You can use the options interchangeably depending on
your preference and the programmed functions.
Procedure:
•
Viewing recent calls using the preprogrammed Recent Calls button:
a. Press the preprogrammed Recent Calls button.
b.
or
to scroll through the list.
c. To return to the Home screen, press the Menu Select button directly below Exit, press
or the PTT button.
•
Viewing recent calls using the radio menu:
a.
or to Rcnt.
150
Information at the LTE Screen on