Table of Contents
Advertisement
5. Press the [START/STOP] button to turn your
monitor off.
Note
• All readings will be deleted. You cannot partially delete the
readings stored in the memory.
• Your monitor automatically turns off after 2 minutes.
6.2
Restoring Your Monitor to the Default Settings
To delete all the information stored in your monitor, follow the
instructions below. Make sure that your monitor is turned off.
1. While holding the
monitor) down, press and hold the [START/
STOP] button for more than 3 seconds.
The display to the right flashes.
2. While holding the
and hold the [START/STOP] button for more
than 3 seconds.
The display stops flashing, then your monitor is restored to
the default settings.
button (rear surface of the
button down again, press
6. Other Settings
EN
33
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the BP5350 and is the answer not in the manual?
Questions and answers
My BP5350 arrived from Amazon it did not include any instructions or manuals. How **** I supposed to operate this thing?
To operate the Omron BP5350 blood pressure monitor without instructions, follow these general steps:
1. Power On: Insert 4 “AA” batteries or connect the optional AC adapter to a power source.
2. Wear the Cuff: Place the cuff around your upper arm, ensuring it is snug but not too tight.
3. Start Measurement: Press the start button to begin automatic inflation and measurement.
4. Read Results: The LCD display will show systolic and diastolic blood pressure along with pulse rate.
5. Store Readings: The monitor automatically saves readings in memory.
6. Use Bluetooth (Optional): Enable Bluetooth to pair with a smart device for data transfer.
7. Power Off: The monitor may turn off automatically, or you can press the power button.
For detailed settings, memory functions, or troubleshooting, refer to the full manual.
This answer is automatically generated
No pairing button on bp5350 monitor