Settings
Brightness
You can set the brightness of the
display, the sensor buttons, and the
dimmed sensor buttons.
Options
–
Display
Controls the brightness of the
display.
– (dark)
– (light) (factory setting)
–
Button lighting on
Controls the brightness of the
activated sensor buttons.
– (dark)
– (factory setting)
– (light)
–
Button lighting off
Controls the brightness of the sensor
buttons that can be activated.
– (dark) (default setting)
– (light)
Useful tip: Ensure that there is a
discernible difference in brightness
between the activated and dimmed
sensor buttons. This makes it easier to
operate the appliance.
88
Display switch-off
The display and the sensor button
lighting is switched off to save energy.
The Start/Stop sensor button flashes
slowly.
Options
–
On
Lighting switches off after 10
minutes.
–
On (not crnt prog)
Lighting remains switched on
throughout the program. The lighting
switches off 10 minutes after the
program has ended.
–
Off
The lighting remains switched on.
Program info
You can select the information that will
be displayed temporarily once a
program has been selected in the
display.
Options
–
Program name
(factory setting)
The program name is shown in the
display for several seconds.
–
Prog. nm. & max ld.
The program name and the maximum
load are shown in the display for
several seconds.
–
Off
Directly after the program has been
selected, the standard display is
shown with temperature, spin speed,
and program duration.
(factory setting)