Disp. Switch-Off Stat; Programme Info; Memory; Water Intake - Miele WCI 670 Operating Instructions Manual

Settings

Disp. switch-off stat.

The display and the sensor control
lighting is switched off to save energy.
The Start/Stop sensor flashes slowly.
Options
– On
Lighting switches off after
10 minutes.
– On (not current pr.)
setting)
Lighting remains switched on
throughout the programme. The
lighting switches off 10 minutes after
the programme has ended.
– Off
The lighting remains switched on.

Programme info

You can select the information that will
be displayed temporarily in the display
after a programme has been selected.
Options
– Programme name
The programme name is shown in the
display for several seconds.
– Prog. & max load
setting)
The programme name and the
maximum load are shown in the
display for several seconds.
–
Off
Directly after the programme has
been selected, the standard display
is shown with temperature, spin
speed, and programme duration.
94
(factory default
(factory default

Memory

The washing machine will save the
last settings (temperature, spin speed
and some of the Extras) selected for a
programme after the programme has
started.
When the programme is chosen again,
the saved settings will appear in the
display.
Memory is deactivated as standard.

Water intake

You can programme the washing
machine to hot water operation.
Options
– (factory default setting)
Cold water
The washing machine will be
operated with cold water only.
– Hot water 
Hot water is used in the main wash.