g Sensor controls for Extras
You can supplement wash
programmes with Extras.
If a wash programme has been
selected, the sensor controls for the
possible Extras light up dimly.
h Sensor
You can view information about the
energy and water consumption of
your washing machine with the
sensor.
See "Washing environmentally and
economically - EcoFeedback" for
more information.
The following information will appear
in the display:
– An estimate of the energy and
water consumption before the
programme begins.
– The actual energy and water
consumption during the
programme or at the end of the
programme.
i Sensor
The sensor starts the Delay start
function. With Delay start you can
delay the start of the programme.
The start of the programme can be
delayed from 15 minutes up to a
maximum of 24 hours. This allows
you to make use of night-time
economy electricity rates, for
example.
See "4. Selecting programme
settings", section "Delay start" for
more information.
Operating the washing machine
j Sensor
You can specify the level of soiling of
the load in three settings. This
sensor is only active with the
TwinDos option activated.
k Start/Stop sensor
Touching the Start/Stop sensor
starts the selected programme or
cancels a programme that has
already been started. The sensor
flashes slowly as soon as it is
possible for a programme to be
started and then lights up constantly
after the programme has started.
l Sensor
The sensor can be used to activate
detergent dispensing with a capsule.
m Programme selector
This is used for selecting
programmes and for switching off
the appliance. The washing machine
is switched on by selecting a
programme, and switched off by
turning the programme selector to
the position.
15