Bluetooth; Information; Preparation; Connection - Kenwood DDX396 Instruction Manual

Other External Components Other External Components
[Satellite Displays the control screen of the
Radio] satellite radio source provided for the
vehicle.
[Media Displays the control screen of the
Player] media player source provided for the
vehicle.
[TEL] Displays the control screen of the
Bluetooth Hands Free function
provided for the vehicle.
[BT Displays the control screen of the
Streaming] Bluetooth streaming function
provided for the vehicle.
[Gauges] Displays the information about the
instruments such as a speedometer.
[Climate] Displays the information about the air
conditioner of the vehicle.
[Parking Displays the information about
Assist] the Parking Distance Sensor of the
vehicle.
[Vehicle Info] Displays the information about the
tire pressures of the vehicle.
[Radar Displays the information about the
Detector] Radar Detector.
Bluetooth® Bluetooth®

Information

Bluetooth is a short-range wireless radio
communication technology for mobile devices such as
mobile phones, portable PCs and other devices.
Bluetooth devices can be connected without cables
and communicate with each other.
Note
• While driving, do not perform complicated
operations such as dialing numbers, using the phone
book, etc. When you perform these operations, stop
your car in a safe place.
• Some Bluetooth devices may not connect to this unit
depending on the Bluetooth version of the device.
• This unit may not work for some Bluetooth devices.
• Connecting conditions may vary depending on your
environment.
• For some Bluetooth devices, the device is
disconnected when the unit is turned off.
• If your mobile phone supports PBAP (Phone Book
Access Profile), you can display the following items
on the touch panel when the mobile phone is
connected.
– Phone book
– Dialed calls, received calls, and missed calls (up to
10 entries in total)

Preparation

Connect and install the microphone beforehand. For
details, see page 56.

Connection

When you connect a Bluetooth device to the unit for
the first time:
1 Register the device by pairing the unit and the
device.
2 Connect the device to the unit. (Page 34)
Registering a new Bluetooth device
Pairing allows Bluetooth devices to communicate with
each other.
• The pairing method differs depending on the
Bluetooth version of the device.
– For devices with Bluetooth 2.1:
You can pair the device and the unit using SSP
(Secure Simple Pairing) which only requires
confirmation.
– For devices with Bluetooth 2.0:
You need to enter a PIN code both on the device
and unit for pairing.
• Once the connection is established, it is registered in
the unit even if you reset the unit. Up to five devices
can be registered in total.
• Two devices for Bluetooth phone and one for
Bluetooth audio can be connected at a time.
However, when "BT Audio" is selected as the source,
you can connect up to five Bluetooth audio devices
and switch between these five devices.
• To use the Bluetooth function, you need to turn on
the Bluetooth function of the device.
ENGLISH 33