Controls And Connectors - Lenovo LXB-L17C User Manual

POWER CORD
Power Source:
1. Make sure the power cord is the correct type required in your area.
2. This LCD monitor has an External universal power supply that allows
operation in either 100/120V AC or 220/240V AC voltage area (No user
adjustment is required.)
3. Connect the power cord into your LCD monitor's power input socket, and
then plug the other end into a 3-pin AC power outlet. The power cord may
be connected to either a wall power outlet or the power outlet socket on
your PC, depending on the type of power cord supplied with your LCD
monitor.
NOTES
A certified p ower supply cord has to be used with this equipment. The
relevant national installation and/or equipment regulations shall be
considered. A certified power supply cord not lighter than ordinary polyvinyl
chloride flexible cord according to IEC 60227 (designation H05VV-F 3G
2
0.75mm or H05VVH2-F2 3G 0.75mm
cord of synthetic rubber according to IEC 60245 (designation H05RR-F 3G
2
0.75mm ) may be used.

CONTROLS AND CONNECTORS

Connecting the signal cable:
monitor' s signal input port, locked it with screws. Then plug the other end to
display card output port,locked it with screws.
Connecting the Power Cord:
monitor's AC power socket. Then plug the power cord into a grounded
AC outlet or UL-approved power strip or the power output socket on your PC.
2
) shall be used. Alternatively a flexible
Connect the signal cable' s 15 pin plug to
Plug the power cord into the LCD
5