Selecting The Terminal Used For Output; Using The Hd/Sd-Sdi Terminal; Using The Hdmi Out Terminal - Canon XA11 Instruction Manual

o Selecting the Terminal Used For Output
To output your recordings on an external monitor, you must first select which terminal you will use.
1 Open the [Output Terminal] screen.
[FUNC.] [MENU]
> >
• Touching [FUNC.] is necessary only when performing the procedure in
2 Touch the desired option and then touch [X].
• If you selected [
relevant procedure below to configure the output signal.
Options
( Default value)
There is no output from any terminal.
[j Off]
There is output only from the HD/SD-SDI terminal.
[ HD/SD-SDI]
[ HD/SD-SDI & HDMI]
There is output only from the HDMI OUT terminal.
[ HDMI]
There is output only from the AV OUT terminal.
[Ò AV OUT]
o Using the HD/SD-SDI Terminal
The digital signal output from the HD/SD-SDI terminal includes the video signal, audio signal and time
code signal. If necessary, perform the following procedure to change the video output signal.
1 Open the [HD/SD-SDI Output] screen.
[FUNC.] [MENU]
> >
• Touching [FUNC.] is necessary only when performing the procedure in
2 Touch the desired option and then touch [X].
NOTES
• You can use the [FUNC.]
whether onscreen displays are embedded in the output video signal.

Using the HDMI OUT Terminal

TM
The HDMI OUT terminal also offers a digital connection and outputs both a video and audio signal.
If you select [k Automatic], the output signal will automatically switch to HD or SD depending on the
capability of the external monitor. In
audio (16-bit, 48 kHz sampling).
1 Open the [HDMI Output] screen.
[FUNC.] [MENU]
> >
• Touching [FUNC.] is necessary only when performing the procedure in
2 Touch the desired option and then touch [X].
[Output Terminal]
q >
HD/SD-SDI], [ HD/SD-SDI & HDMI] or [
There is output from the HD/SD-SDI and HDMI OUT terminals.
[HD/SD-SDI Output]
q >
[MENU]
> > q
mode, the audio output signal will be 2-channel linear PCM
[HDMI Output]
q >
Connecting to an External Monitor
[Output Onscreen Displays] setting to select
>
mode.
HDMI], continue with the
mode.
mode.
103