Fujitsu DX100 S3 Setup Manual page 7

Mini SAS HD Cable Between Enclosures
3
When drive enclosures are installed, use mini SAS HD cables between enclosures to connect between the DI ports of
each enclosure.
When connecting the mini SAS HD cable between enclosures,
IMPORTANT
check the direction of the connector (the tab must be pointed
downward) and firmly insert all the way in.
Cable
● DI (OUT) side plug
The " ■ " symbol is
printed here.
● DI (IN) side plug
The "●" symbol is
printed here.
Attach the destination labels
to the plugs of the mini SAS HD
cables between enclosures.
FUJITSU Storage ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems Setup Guide
Rear view
● Controller enclosure
The controller enclosure only has DI (OUT) ports.
Connect the connectors on which the " " symbol is printed.
DI OUT
( ) port
● Drive enclosure
DI IN DI (OUT) port
( ) port
● Example of mini SAS HD cable connections between enclosures
(when two drive enclosures are installed)
Between Controller 0 and I/O module line 0, connect the drive enclosures
in ascending order of the drive enclosure numbers.
Between Controller 1 and I/O module line 1, connect the drive enclosures
in descending order of the drive enclosure numbers.
7
Copyright 2017 FUJITSU LIMITED
The DI (IN) port is on the left side and the DI (OUT) port is on
the right side of each I/O module.
Plug the connectors on which the " " symbol is printed into
the DI (IN) ports.
Plug the connectors on which the " " symbol is printed into
the DI (OUT) ports.
Tab
Drive enclosure 2
Drive enclosure 1
Controller enclosure
P3AM-7852-06ENZ0