Drive Cage - HP ProDesk 400 G4 Maintenance And Service Manual

Drive cage

1. Prepare the computer for disassembly (see
2. Remove the access panel (see
3. Disconnect the power cable (1) and data cable (2) from the rear of the slim optical drive.
4. Disconnect the power cable (1) from the hard drive.
5. Disconnect the data cable (2) from the hard drive.
6. Press in on the drive cage release latch (1).
7. Rotate the drive cage up (2) until it rests at an angle.
28 Chapter 4 Removal and replacement procedures
Preparation for disassembly on page
Access panel on page 24).
23).