Kenwood DNX9170DABS Instruction Manual page 66

Setting Up
4
Adjust the date, then adjust the time.
5
Touch [Set].
Ñ
Touch panel adjustment (
1
Touch [Touch Panel Adjust] on the User
Interface screen.
h Touch Panel Adjust screen appears.
h
2
Follow the instruction on the screen and
long touch the center of each [
1
NOTE
• To cancel the touch panel adjustment, touch
[Cancel].
• To reset to the initial status, touch [Reset].
Ñ
Learning function of steering
remote
This function is available only when your
vehicle is equipped with the electrical steering
remote controller.
If your steering remote controller is not
compliant, learning may not be completed
and error message may appear.
1
Touch [Steering Remote Controller] in
the User Interface screen.
h Steering Remote Controller Setting h
screen appears.
66
2
Press and hold the steering remote
controller button
NOTE
• You can have the unit learned all buttons
3
Touch the function you want to set.
)
].
4
2
Repeat steps 2 and 3 as necessary.
5
Touch [Learning completed].
NOTE
• When changing the function already learned,
press and hold the button you want to change
in step 2 and then touch to select the changed
function from the function list.
• Confirm the contents of the settable function on
the function list. You cannot edit the function list.
• To initialize the contents, touch [Learning
initialization] of [Steering Remote
Controller] in User Interface screen. After you
touch [Initialize], a confirmation message
appears. Follow the message and complete the
operation.
at a time. In that case, press the all buttons
one at a time and after pressing all of them,
touch [Learning completed] in Steering
Remote Controller Setting screen. However,
new functions cannot be learned after this
operation.