Table of Contents
Advertisement
Charging the battery
• The battery that can be used with this unit is DMW-BMB9E.
• We recommend charging in a location where the ambient temperature is
between 10 °C and 30 °C (50 °F to 86 °F).
Make sure that the camera is turned off.
1
Insert the battery to this unit, and then connect this unit
to the AC adaptor (supplied) ( ) or a PC ( )
USB connection cable (supplied)
AC adaptor (supplied)
To the electrical outlet
Computer
Getting ready: Turn on the computer.
• Always check the direction of the pins and hold the plug straight to insert
or remove it. (If the cable is inserted in the wrong direction, the pins could
become deformed and cause faulty operation.) Also, do not insert into the
wrong socket. Doing so may cause damage to this unit.
[USB/CHARGE] socket
• This terminal is located at the bottom when the
camera is in an upright position.
Preparations
DVQX1151 (ENG)
15
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Lumix DC-FZ82 and is the answer not in the manual?
Questions and answers
how to use self-timer
To use the self-timer on the Panasonic Lumix DC-FZ82:
1. Select the self-timer mode using [ ].
2. Press [MENU/SET].
3. Choose one of the available self-timer options:
- 10-second delay: The shutter activates after 10 seconds.
- 10-second delay with three pictures: The shutter activates after 10 seconds, taking three pictures at 2-second intervals.
- 2-second delay: The shutter activates after 2 seconds, useful for reducing camera shake.
4. After selecting the desired option, press the shutter button.
5. The self-timer indicator will flash, and then recording will start.
6. The focus and exposure are locked when the shutter button is pressed halfway.
7. Using a tripod is recommended for stability.
The self-timer cannot be used in certain shooting modes, such as during motion picture recording, time-lapse shooting, and some advanced settings.
This answer is automatically generated
@Mr. Anderson, thanks but when I press [MENU/SET] I do not get the three self-timer options. I get "Custom Mode - Set1 - C1, C2, C3".