Miele KM 3034 Operating And Installation Instructions page 36

Problem solving guide
Problem
The flame suddenly
looks different.
The gas flame goes out
during operation.
The ignitor on the
burner does not spark.
The in-operation/
residual heat indicator
for a cooking zone is
flashing.
36
Possible cause and remedy
The burner parts are not positioned correctly.
 Position the burner parts correctly.
The burner head or the holes in the burner cap are
dirty.
 Remove any soiling.
The burner parts are not positioned correctly.
 Position the burner parts correctly.
There has been a power outage.
 Turn all of the controls clockwise to"". Wait for the
power to return.
The mains circuit breaker has tripped.
 You may need to contact a qualified electrician or
Miele.
There is food residue stuck between the ignitor and
the burner cap.
There is food residue on the ignition safety device.
 Remove any soiling (See "Cleaning and care").
There has been a power outage.
 Turn all the control knobs in a clockwise direction
to "". Once power has been restored, the cooktop
can be used as normal again.