Operation; Rapid Ignition System; Switching On - Miele KM 3034 Operating And Installation Instructions

Operation

Rapid ignition system

The appliance is supplied with a rapid
ignition system with the following
features:
– Rapid ignition without pressing and
holding the control,
– Automatic re-ignition
Should the flame be extinguished by
a gust of air, the burner will re-ignite
automatically. If re-ignition is
unsuccessful, the gas supply will be
cut off automatically (see "Ignition
safety device").
26

Switching on


Fire hazard!
Do not leave the cooktop unattended
whilst it is being used.
 The control for the burner required
must be pressed in and turned anti-
clockwise to the large flame symbol
to switch on. The ignitor will "click"
and ignite the gas.
When a control knob is activated, a
spark is generated on all burners. This
is normal and does not indicate a
fault.
 If the burner fails to ignite, turn the
control knob to the "" position.
Aerate the room or wait at least
1 minute before trying again.
 If the burner does not ignite the
second time, turn the control knob
back to "" and see "Problem solving
guide".
When switching on, re-ignition
sometimes occurs (1-2 clicks) if the
flame on the thermocouple has gone
out briefly, or if the thermocouple is
not hot enough, e.g. following a gust
of air.