Advertisement
Maintenance
TUB CLEAN
In the case of cleaning the washing / spin drying tub.
Do not put the clothing in the tub in this course.
Caution
Press Power ON/OFF key
with the top cover closed.
1
Press COURSE key,
and select TUB CLEAN course.
2
Press WASH key, and select the washing time.
Press WATER LEVEL key, and select the water
level as necessary .
Press START/PAUSE key.
3
The washing machine starts to supply water,
and displays remaining operation time.
The machine generates a beep when it finishes supplying water.
Press START/PAUSE key,
and the washing machine pauses.
4
Put the washing machine cleaner for
washing the tub.
Close the top cover and press START/PAUSE key
5
to restart.
14
Instruction on control panel functions
Control panel / Display
Course for reducing the time to dry.
AIR DRY
Spin-drying with high-speed takes air into the inner tub from the hole of top lid.
AIR DRY course reduce the time to dry in the shade greatly.
Select the time: [ - ] = 0 min , 30 min, 60 min, 90 min.
[ - ] = 0
Select the appropriate water level depending on course or kinds of clothing.
WATER LEVEL
(Select from 8 steps regulation)
RESERVE
Reserve the time as desired. Select the time: 1 hr – 24 hrs. Reserved time indicates
the time to finish the operation. It means, the operation finishes 1 hour later when
1 hr is selected. Set the time after selecting the necessary course.
SOAK
This course can be added to every course except for TUB CLEAN course.
When the SOAK course is selected the light is turned on. During soaking,
the water in the tub is stirred intermittently. Select the soaking time:
This course gives softener more efficacy. Adds the time to soak in the water
FRAGRANCE
containing softener at the beginning of final rinsing.
CHIID LOCK is set by holding down FRAGRANCE key for 3 sec. The error tone
CHILD LOCK
can be heard if top cover is opened after water supply start. If top cover has
been opened for 30 sec in such conditoin, the water is automatically drained.
Additional
function
It is possible to operate only POWER key and START/PAUSE
key in this mode.
AUTO CLEAN is set by holding down WATER LEVEL key for 3 sec. (Remove
AUTO CLEAN
the dirt in the washing / spin drying tub and the back side of palsator with clean
water at the final spinning,)
The washing machine displays the water level at the beginning of running.
The washing machine displays the remaining operation time during the operation.
The washing machine displays reserved time during the RESERVE course running.
The washig machine displays a presentation in the page 15, when an abnormality happens.
5 min – 24 hrs
.
7
Advertisement
