Panasonic TX-40CS630E Ehelp page 101

4. Select Store and press
Use Fine Tuning
●
programme (affected by weather conditions, etc.).
If a VCR is connected only with the RF cable, select channel position 0.
●
■
DVB-via-IP (DVB-S)
Please consult the received satellite broadcasting companies for the
●
setting.
1. Select Transponder Frequency
FEC / Service ID
2. Select Start scan
■
DVB-via-IP (DVB-C)
1. Select Frequency
Service ID and set with
Normally set Symbol Rate
●
2. Select Start scan
■
DVB-via-IP (DVB-T)
1. Select Frequency
Cursor buttons or
2. Select Start scan
= Note =
For details of DVB-via-IP connections
●
Functions > DVB-via-IP > DVB-via-IP client connection
Not valid when Client Settings
●
OK to set.
to make small adjustments to the tuning of an individual
/ Symbol Rate
and set with Cursor buttons
and press OK to search.
/ Bandwidth / Modulation Type
Cursor buttons
to Auto.
and press OK to search.
/ Bandwidth / Modulation
Numeric buttons.
and press OK to search.
is set to
- 101 -
/ Polarisation
or Numeric buttons.
/ Symbol Rate
or Numeric buttons.
/ FEC / Service ID
Multicast Environment
/ Modulation /
/ FEC /
and set with
(DVB-via-IP)