Download Print this page

Philips ComfortCare GC2700 series User Manual page 14

Hide thumbs Also See for ComfortCare GC2700 series:

Advertisement

Problem
EN
The iron does not produce
steam.
The iron leaks.
The steam boost function does
not work properly.
Flakes and impurities leak from
the soleplate during ironing.
Water spots appear on the
garment during ironing.
Masalah
ID
Setrika tidak mengeluarkan uap.
Setrika bocor.
Fungsi semburan uap tidak
bekerja dengan benar.
Serpihan dan kotoran keluar dari
tapak setrika selama menyetrika.
Bintik-bintik air muncul pada
pakaian selama menyetrika.
KO
14
Possible cause
The steam position is set to 0.
The water tank is fi lled beyond
its capacity.
You have used the steam boost
function too often with not
enough intervals.
Hard water forms fl akes inside
the soleplate.
Steam has condensed onto the
ironing board.
If the underside of the ironing
board is wet, wipe it dry with a
piece of dry cloth.
Kemungkinan penyebab
Posisi uap disetel ke 0.
Tangki air diisi melebihi kapasitas.
Anda menggunakan fungsi
semburan uap terlalu sering tanpa
interval yang memadai.
Air sadah membentuk serpihan di
dalam tapak setrika.
Uap mengembun pada meja
setrika.
Jika sisi bawah meja setrika basah,
seka untuk mengeringkannya
dengan kain kering.
Solution
Set the steam position to
Do not fi ll the water tank beyond the 'MAX'
symbol.
Leave the iron to rest for a while and then wait
for the iron to heat up before you use the steam
boost function again.
Use the calc-clean function until all fl akes and
impurities have been disposed of.
Occasionally iron wet spots without steam in
order to dry them.
To prevent steam from condensing onto the
ironing board, use an ironing board with a wire
mesh top.
Solusi
Setel posisi uap ke ; .
Jangan mengisi tangki air melewati simbol 'MAX'.
Biarkan setrika di posisi rebah selama beberapa
saat sebelum Anda menggunakan fungsi sem-
buran uap kembali.
Gunakan fungsi calc-clean hingga semua serpihan
dan kotoran dibuang sebagaimana mestinya.
Sesekali setrika bintik-bintik basah tanpa uap
untuk mengeringkannya.
Untuk mencegah uap mengembun pada meja
setrika, gunakan meja setrika yang dilapisi anya-
man dari kawat.
;

Advertisement

loading