ASSEMBLING THE RAT PROTECTION PANEL
(APPLICABLE MODELS ONLY)
Tilt the washer a little, insert the shutter and fi nally fi x the shutter with screw to the base as
shown in the picture.
1. Insert the rat protection panel to the
assembling hole on back side to the end.
WA4000H-03636A_EN (India)_150821.indd Sec10:19
WA4000H-03636A_EN (India)_150821.indd Sec10:19
Rear Side
English - 19
2. If you have diffi culty inserting the panel lift
up the washer a little and insert it.
2015-08-21
2015-08-21
4:29:38
4:29:38