HP EliteBook 725 G4 Maintenance And Service Manual page 71

3. Release the WLAN antennas (1) and WWAN antennas (2) (if equipped) from the routing channel and clips
built into the keyboard/top cover.
CAUTION: When installing the display assembly, be sure that the wireless antenna cables are routed
and arranged properly. Failure to properly route the antennas can result in degradation of
the computer's wireless performance.
4. Remove the 4 Phillips PM2.5×5.0 screws (1) that secure the display assembly to the computer.
5. Swing the hinges (2) up and back.
6. Slide the keyboard/top cover (3) up and forward at and angle and separate the keyboard/top cover from
the display assembly.
NOTE: The following steps apply only to computer models equipped with non-TouchScreen display
assemblies.
Component replacement procedures 61