Replacing The Computer Base; Procedure; Post-Requisites - Dell Inspiron 5452 Service Manual

Replacing the computer base

WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your
computer, follow the instructions in
computer. For more safety best practices, see the Regulatory
Compliance home page at dell.com/regulatory_compliance.

Procedure

1 Align the optical-drive interposer with the slot on the computer base and
snap it into place.
2 Turn the computer base over.
3 Align and place the computer base on the palm-rest assembly.
4 Press the computer base down along the edges to snap it into place.
5 Replace the screws that secure the computer base to the palm-rest
assembly.
6 Turn the computer over and open the display.
7 Replace the screws that secure the computer base to the palm-rest
assembly.
8 Slide the optical-drive cable into the connector on the system board and
press down the latch to secure the cable.

Post-requisites

1 Replace the keyboard.
2 Replace the
3 Follow the procedure from step 5 to step 7 in
4 Replace the
5 Replace the
6 Replace the battery.
wireless card.
optical drive.
base cover.
computer. After working inside your
After working inside your
"Replacing the hard drive".
47