Table of Contents
Advertisement
Output of user bits
[LINE&FREQ]
[REC FORMAT]
[AVC-I100/60P]
[AVC-G25/60P]
[AVC-G12/60P]
[AVC-I100/30PN]
[1080-59.94P]
[AVC-I100/24PN]
[AVC-I100/60i]
[AVC-I50/60i]
[AVC-G50/60i]
[1080-59.94i]
[AVC-G25/60i]
[AVC-G12/60i]
[DVCPRO HD/60i]
[AVC-I100/50P]
[AVC-G25/50P]
[AVC-G12/50P]
[1080-50P]
[AVC-I100/25PN]
[AVC-I100/50i]
[AVC-I50/50i]
[AVC-G50/50i]
[1080-50i]
[AVC-G25/50i]
[AVC-G12/50i]
[DVCPRO HD/50i]
[AVC-I100/60P]
[AVC-I50/60P]
[AVC-G50/60P]
[720-59.94P]
[AVC-G25/60P]
[AVC-G12/60P]
[DVCPRO HD/60P]
[AVC-I100/50P]
[AVC-I50/50P]
[AVC-G50/50P]
[720-50P]
[AVC-G25/50P]
[AVC-G12/50P]
[DVCPRO HD/50P]
[DVCPRO50/60i]
[480-59.94i]
[DVCPRO/60i]
[DV/60i]
[DVCPRO50/50i]
[576-50i]
[DVCPRO/50i]
[DV/50i]
User bits settings
Sets the user bits to be recorded in the sub code area in the main menu → [RECORDING SETUP] → [UBG MODE].
Item
[USER]
Records internal user values. You can set the user value in the main menu → [RECORDING SETUP] → [UB PRESET]. Setting
values are held even when the power is turned off.
For details, refer to "How to input user bits" (page 92).
[TIME]
Records the time measured by the internal clock.
[DATE]
Records the hour digit of year/month/day/date-time measured by the internal clock.
[EXT]
Records the user bits values currently entered to the <TC IN/OUT> terminal.
[TCG]
Records the time code value.
[FRAME RATE]
Records the camera photo frame rate information.
When playing back clips recorded in native format, the same frame rate information as VITC UB is output regardless of the
recorded value. Use at this setting when the editing device such as a computer uses the frame rate information of the user bits.
[REGEN]
Reads the user bit last recorded to P2 card that is currently to be recorded to and recording this value as it is.
@
NOTE
t When slave-lock to the user bits value input to the <TC IN/OUT> terminal, set to [EXT].
t During slaving, the [UB] display letters are shown with black and white reversed.
t After executing slave once, even if input from the <TC IN/OUT> terminal stops, the slave status will continue. However, in the following cases, the
slave status of the user bits will be released.
- When [UBG MODE] is set to other than [EXT]
- When [UB PRESET] is executed
- When the power is turned off
Chapter 4 Shooting — Setting the time data
Setting
[CAMERA MODE]
[FRAME RATE]
—
Other than [30fps]
Other than [24fps]
—
[60i]
—
Other than [25fps]
—
[50i]
—
—
[60i]
[30P]
[50i]
[25P]
UB for TC OUT
—
LTC UB is output.
[30fps]
Outputs along to
[24fps]
over 60P, based on
LTC UB.
—
LTC UB is output.
—
—
LTC UB is output.
[25fps]
—
LTC UB is output.
—
—
LTC UB is output.
—
LTC UB is output.
—
LTC UB is output.
—
—
LTC UB is output.
—
Description
– 91 –
Output UB
LTC UB for HD SDI
VITC UB for HD SDI
LTC UB is output.
VITC UB is output.
Outputs along to
over 60P, based on
LTC UB.
LTC UB is output.
VITC UB is output.
LTC UB is output.
VITC UB is output.
LTC UB is output.
VITC UB is output.
LTC UB is output.
VITC UB is output.
LTC UB is output.
VITC UB is output.
None
None
None
None
Advertisement
Table of Contents
