Security Function Notice; Resetting Procedure - Sanyo PDG-DXL2000E Service Manual

Security Function Notice

This projector provides security functions such as "PIN code lock" and "Logo PIN code lock". When the projector has
set these security function on, you are required to enter correct PIN code to use the projector. If you do not know the
correct PIN code to the projector, the projector can no longer be operated or started. In this case, you must reset those
function first according to the resetting procedure described below and then check up on the projector.
Function
PIN code lock
Logo PIN code lock

Resetting procedure

1
Disconnect the AC power cord from the AC outlet.
2
A s pressing the SELECt button, connect the AC power cord into an AC outlet again.
3
Keep pressing the SELECt button and then press the ON/StAND-BY button.
4
R elease the ON/StAND-BY button first and then release the SELECt button.
- T he PIN code lock and Logo PIN code lock will be reset as the initial PIN code at the factory.
Please refer to the owner's manual for further information of the security functions.
Description
Prevents the projector from being operated by an unau-
thorized person.
Initial code: "1234"
Prevents an unauthorized person for changing the start-
up logo on the screen.
Initial code: "4321"
-11-