Advertisement
NOTE:
Although the usual checking time is about 15 - 30 min-
utes. If it takes too long (more than 45 minutes), there
may be a failure in checking. Finish the checking by
pressing Abort button and start the checking again.
(10) Press either the Print button or the View button to print or
display the test results.
When the test results are checked, press Exit button.
(11) When the Print button is pressed the test results are output
to the printer, and the View button is pressed the results are
shown as below. Pressing the Print button in the down right
can also print the results. When the checking the result is
finished, press Exit button to finish the display of the test
results.
The time and date
of the test results
This is a serial
output is recorded here.
number of the
Microdrive and it
is exclusive to
each product.
When CleanDisk is executed, it performs the following tasks.
Test items
(1)
Drive Initialization
Test whether the drive recognizes of not.
(2)
Set Features
Initialize the internal function of the
Microdrive.
(3)
The following tasks are carried out
Cleanup and/or un-clip
1.Delete all data
Entire Disk
2.Restore to the original capacity
3.Formatting
4.Clear the error information
5.Deleting other OS settings
(4)
Media Test(s)
Final test in writing/ reading
(12) Press X button or press Exit in the File menu to finish the
program.
Exit button
The Microdrive model
name is displayed here.
It shows that the
Microdrive is
HITACHImade 4GB type.
This is also the
Microdrive model name.
The capacity of the
disk is displayed here.
The testing detail is
displayed here.
The time and
date of the start
Print button
and end the
testing are
Exit button
displayed here.
The results are recorded.
Outline
(Deleting
the
lacked
information)
(13) When asked to finish the program, press Yes button.
NOTE:
Performing CleanDisk will not change the disk name given by
the user.
If the PC will be returned to the same user, there will be no
problem.
If the user is changed, change the disk name to MICRO-
DRIVE.
Press X button
Press Yes (Y) button
This is the status that
the user changes the
disk name to Travel 1.
If the user is changed,
change the disk name to
MICRODRIVE.
(No.YF058)1-19
Advertisement
